Tool not categorized Gedore 2018608

(Series 1.19/0XS) Puller 3-arm pattern XS legs 50x70 mm — Gedore 2018608 is a compact three-arm puller with very slim forged legs designed for external pulling in confined spaces. The tool combines a threaded spindle and narrow hooked feet to access tight locations such as electric motor assemblies while providing controlled extraction force.

Advantages

The puller offers a maximum clamping spread for external pulling of 50 mm and a clamping reach of 70 mm. It is fitted with a spindle of size M10 x 1.5 with a length of 100 mm. The hooked feet have a width of 8 mm, a depth of 3 mm and a tip thickness of 2 mm, with a tip diameter of 2.9 mm. The maximum rated loading is 0.8 t. The unit weight is approximately 0.3 kg and it is supplied as a single piece.

Suitable for

• External pulling tasks on shafts, bearings and gears
• Work in tight or hard-to-reach areas such as electric motors
• Light to medium extraction tasks up to 0.8 tonnes

Key specifications

• Model: Series 1.19/0XS, Gedore 2018608
• Clamping spread (max): 50 mm
• Clamping reach: 70 mm
• Spindle: M10 x 1.5, length 100 mm
• Hooked foot width: 8 mm
• Hooked foot depth: 3 mm
• Tip thickness: 2 mm
• Tip diameter: 2.9 mm
• Maximum load: 0.8 t
• Weight: 0.3 kg
• Packing unit: 1 piece

How to use

Position the three hooked feet around the component to be extracted so the narrow feet can engage behind the part. Adjust the arms to achieve the required clamping spread and ensure the hooked foot tips sit securely behind the workpiece. Turn the M10 spindle clockwise to apply steady pulling force until the part is removed. Reverse the spindle to release the puller. Use steady, controlled turns and reposition the feet if slippage occurs.

Usage recommendations

Use appropriate personal protective equipment and ensure the puller is rated for the load before applying force. Avoid side loading and inspect hooked feet and spindle for damage before each use.