Angle grinder GEKO model 230 with switch — disc size 230 mm, power range 25/500

GEKO angle grinder model 230 with switch is a handheld power tool designed for cutting, grinding and surface preparation using 230 mm discs. Specified with parameters shown as 25/500, this grinder is intended for use with standard abrasive and cutting wheels and is suitable for tasks on metal and masonry. The switching mechanism provides straightforward on/off control for typical construction, renovation and workshop applications.

Advantages

This angle grinder accepts large 230 mm discs that enable deeper cuts and faster material removal compared with smaller models. The integrated switch offers direct control of the motor during operation. The design supports handheld use in diverse work environments, allowing compatibility with common abrasive and cutting wheels for metal and masonry. The tool’s specification 25/500 indicates its operating range for applications that require moderate to higher power throughput.

Suitable for

• Cutting steel profiles, rebar and metal sheets
• Grinding welds and removing rust or paint from metal surfaces
• Cutting and shaping masonry, concrete blocks and paving stones
• Surface preparation before painting or coating
• General renovation and construction site tasks

Key specifications

• Disc diameter: 230 mm
• Handheld angle grinder with on/off switch
• Compatible with standard abrasive and cutting wheels for metal and masonry
• Designed for cutting, grinding and surface preparation
• Suitable for use on metal and masonry materials

How to use

Fit a compatible 230 mm disc appropriate for the material and task, ensuring the disc is mounted and tightened according to the wheel manufacturer’s instructions. Hold the grinder with both hands for stable control and switch the tool on using the integrated switch. Apply steady, even pressure while moving the disc across the work surface; avoid excessive force or twisting motions. After use, switch off the tool and allow the disc to stop completely before setting the grinder down. Observe general safety practices such as wearing eye, hearing and hand protection and making sure the workpiece is secured.

Usage recommendations

Use discs rated for 230 mm with the appropriate maximum speed for the wheel and tool; choose abrasive type according to material (cutting discs for metal, diamond or masonry discs for concrete and stone). Inspect discs for damage before each use, maintain a firm two-handed grip during operation, and wear personal protective equipment. For prolonged cutting or grinding, allow the motor to cool periodically to avoid overheating.