Abrasive sanding discs with holes 225 mm P180 GEKO Żyrafa — pack of 10

Abrasive sanding discs with holes 225 mm P180 GEKO Żyrafa — pack of 10 are medium-fine grit sanding discs designed for orbital and rotary sanders that accept 225 mm discs with perforations. Each disc features P180 abrasive grain suitable for intermediate sanding of wood, painted surfaces, varnishes and putties. The perforations are arranged to align with dust-extraction ports on compatible sanders, reducing clogging and helping maintain cutting performance while preparing surfaces for further finishing.

Advantages

The discs provide consistent P180 grit performance across the pack, ensuring uniform material removal and surface smoothing. Perforations improve dust extraction and extend abrasive life by reducing buildup. Their 225 mm diameter offers broad contact area for faster work on larger panels, and the GEKO Żyrafa construction balances flexibility and abrasion resistance for controlled sanding on a variety of substrates.

Suitable for

• Intermediate sanding of raw and finished wood
• Removing minor imperfections from paint and varnish
• Leveling filler and putty before final finishing
• Surface preparation prior to repainting or re-coating
• Use with orbital and rotary sanders that accept 225 mm discs with holes

When it may not be suitable

These P180 discs are intended for intermediate sanding and smoothing; they are not suitable for heavy stock removal or aggressive shaping where coarser grits (lower P numbers) are required. Conversely, for very fine finishing or polishing prior to final clear coats, finer grits will be needed. Also, optimal dust extraction requires a sander whose hole pattern aligns with the disc perforations; without alignment extraction efficiency may be reduced.

Key specifications

• Diameter: 225 mm
• Abrasive grit: P180 (medium-fine)
• Perforated design for dust extraction
• Pack quantity: 10 discs
• Suitable for orbital and rotary sanders compatible with 225 mm perforated discs

How to use

Attach a disc securely to a compatible 225 mm sanding pad, ensuring the perforations align with the sander's dust ports if possible. Start sanding with moderate pressure and move the sander evenly over the surface to avoid creating grooves or uneven spots. Inspect the disc and the workpiece regularly; replace discs when abrasive performance declines or when clogged. For best results, combine with an active dust-extraction system and use appropriate personal protective equipment such as eye protection and a dust mask.

What to consider before purchase

• Confirm your sander accepts 225 mm diameter discs and that the hole pattern matches or allows adequate dust extraction
• Check that P180 grit meets your sanding stage requirements (intermediate smoothing, not heavy stock removal or final polishing)
• Verify pack quantity (10 discs) meets expected consumption for your project
• Consider the materials you will sand — these discs are designed for wood, paint, varnish and fillers

Usage recommendations

Use these 225 mm P180 GEKO Żyrafa discs for controlled intermediate sanding tasks. Combine with correct speed settings for the material, ensure good dust extraction alignment, and replace discs when performance drops to maintain consistent surface quality.