Sanding disc with holes 190 mm P80 GEKO, pack of 10 for drywall sander

Pack of 10 GEKO sanding discs, 190 mm in diameter, with pre-cut dust extraction holes and P80 grit. These abrasive discs are designed for use with drywall sanders to perform medium-coarse sanding on gypsum, plaster and paint layers. The discs allow efficient material removal and surface leveling on walls and ceilings while supporting dust extraction systems for cleaner working conditions and improved visibility of the working surface.

Advantages

The GEKO sanding discs combine a uniform P80 abrasive grit with a standard 190 mm diameter that fits most drywall sanding heads. Pre-cut holes align with common dust-extraction patterns, enabling effective suction of sanding debris. The pack of 10 provides multiple replacements for continuous work, reducing downtime. The abrasive is suitable for smoothing joints, removing loose material and preparing substrates for primer and paint without aggressive cutting that could damage the underlying board.

Suitable for

• Sanding gypsum boards and plaster surfaces on walls and ceilings
• Surface preparation before priming and painting
• Removing loose paint, joint compound ridges and surface imperfections
• Use with portable or pole-mounted drywall sanders equipped for 190 mm discs

Key specifications

• Diameter: 190 mm
• Abrasion grade: P80 (medium-coarse)
• Perforation: pre-cut dust-extraction holes compatible with common sanding heads
• Pack quantity: 10 discs
• Intended materials: gypsum, plaster, paint layers

How to use

Attach a disc to a compatible 190 mm drywall sander following the tool manufacturer's instructions, ensuring the perforations align with the sander's dust-extraction pattern. Operate the sander at the recommended speed and apply steady, even pressure, moving across the surface to avoid gouging. Replace discs when the abrasive wears down or clogging reduces efficiency. Use appropriate personal protective equipment, including eye protection and a dust mask, and connect a dust-extraction system when available to reduce airborne particles.

Usage recommendations

For best results on gypsum and plaster, start with P80 to remove excess joint compound or rough material, then progress to finer grits for final smoothing. Avoid excessive pressure to prolong disc life and maintain a consistent surface. Store discs flat in a dry environment to prevent warping or contamination.