Jump cables GEKO 1500A 6 m — heavy-duty battery starter leads, 1500 A, 6 m length

GEKO Jump Cables 1500A 6 m are heavy-duty battery starter leads engineered to transfer high current for reliable jump-starting of vehicles. At a length of six metres, these jumper cables allow flexible positioning of donor and recipient vehicles while maintaining clear identification of positive and negative clamps. Insulated grips and sturdy clamp construction aim to simplify roadside use and handling.

Advantages

These jump cables combine high current capacity with extended reach to support quick engine starts in low-voltage situations. The clamps feature clear polarity marking and insulated handles to reduce the risk of accidental contact. Thick, flexible conductors and reinforced insulation improve durability during repeated use and exposure to outdoor conditions. The cables are designed for straightforward connection and disconnection under typical roadside conditions.

Suitable for

• Jump-starting passenger cars
• Assisting light commercial vehicles and vans
• Emergency roadside battery boosts
• Workshops and service vans for on-site starts

Key specifications

• Rated current capacity: 1500 A
• Cable length: 6 m
• Heavy-duty conductor cross-section for high current transfer
• Insulated clamp handles for safer handling
• Clearly marked positive and negative clamps
• Durable outer insulation resistant to abrasion and outdoor use

How to use

Park the donor vehicle close enough so the 6 m cables can reach both batteries without stretching. Turn off both engines and electrical consumers. Connect the positive clamp to the positive terminal of the discharged battery and then to the positive terminal of the donor battery. Connect the negative clamp to the negative terminal of the donor battery and attach the other negative clamp to an unpainted metal ground point on the vehicle with the discharged battery, away from the battery and fuel system. Start the donor vehicle, then attempt to start the discharged vehicle. Once the engine runs, disconnect the clamps in the reverse order and stow the cables.

Usage recommendations

Inspect clamps and cable insulation before each use. Avoid contact between clamps during connection. Use the 6 m length to position vehicles with good grounding and safe access; if repeated jump-starts are required, check the battery and charging system for faults.