Staple nails GEKO 1.2 x 2.0 mm, 10 mm leg, 1000 pcs

GEKO staple nails 1.2 x 2.0 mm with 10 mm leg length, pack of 1000 pieces, are steel staples intended for use in manual and pneumatic staplers that accept this size. Designed for light fastening tasks, these staples provide consistent penetration and holding power in materials such as fabric, insulation, thin wood, cardboard and some plastics. The compact leg length and medium wire thickness make them suitable for general repair, assembly and craft applications where a discreet and reliable fastening is required.

Advantages

Made from steel for dependable holding strength, these staples deliver uniform performance and consistent clinch quality. The 1.2 mm wire diameter balances ease of driving with adequate shear resistance, while the 10 mm leg length allows fastening through thin to medium-thickness materials without excessive protrusion. Supplied in a pack of 1000, the set reduces the need for frequent reloading during repetitive tasks and is compatible with a range of staplers that accept this staple dimension.

Suitable for

• Upholstery and fabric fastening
• Insulation and vapor barrier attachment
• Fixing wiring clips and light cable management
• Light woodworking and joinery of thin components
• Crafts, hobby projects and general repair

Key specifications

• Wire diameter: 1.2 mm
• Crown thickness: 2.0 mm
• Leg length: 10 mm
• Material: steel
• Pack quantity: 1000 pieces

How to use

Select a stapler compatible with staples of 1.2 x 2.0 mm and a 10 mm leg; consult the stapler manual if unsure. Load the staple strip according to the stapler manufacturer's instructions, ensure the work surfaces are aligned and supported, then apply steady pressure (for manual staplers) or trigger the pneumatic stapler at the intended fastening point. For thin or delicate materials, test on a scrap piece to verify penetration depth and holding before proceeding with the main workpiece. Replace or re-load staples when the pack is depleted or if misfeeds occur.

Usage recommendations

Use appropriate personal protective equipment and eye protection when operating staplers. For best results, match staple leg length to material thickness and avoid driving staples into very hard or brittle substrates. When fastening electrical wiring, ensure staples do not pierce conductor insulation.