Wire Brush, Front Brass 50 mm with Shank, GEKO

Front-mounted brass wire brush GEKO with a 50 mm working diameter and a shank for direct attachment to drills and rotary tools. This brush is designed for surface cleaning tasks such as removing rust, old paint, scale and light burrs, and for gentle polishing of metal and other hard surfaces. The brass wire construction provides a balance between abrasion and softness to limit scratching on softer metals while maintaining effective material removal.

Advantages

The brass filaments resist sparking and reduce the risk of damaging underlying metal compared with harder steel brushes. A 50 mm working diameter offers a compact head suitable for confined areas and detail work. The shank-mounted design ensures quick, secure attachment to compatible rotary tools and drills, enabling consistent rotational speed and control. The brush is durable for repeated light to medium cleaning tasks and is straightforward to replace when worn.

Suitable for

• Removing rust and scale from small metal parts
• Stripping old paint and coatings from edges and curved surfaces
• Deburring machined parts and cleaning weld seams
• Light polishing and surface preparation before painting or coating
• Cleaning contacts and fittings without aggressive scratching

Key specifications

• Working diameter: 50 mm
• Brush material: brass wire filaments
• Mount type: shank for direct insertion into drills and rotary tools
• Intended use: surface cleaning, rust and paint removal, deburring, light polishing
• Compatibility: suitable for tools accepting the specified shank diameter

How to use

Secure the shank in the chuck of a drill or rotary tool and tighten according to the tool manufacturer’s instructions. Start at low speed to position the brush against the workpiece, then increase speed as needed while maintaining steady, controlled pressure. Move the brush across the surface with smooth, overlapping passes; avoid excessive force or prolonged dwell in one spot to minimize surface damage. After use, clean debris from the brush and inspect for filament wear; replace the brush when bristles are significantly worn or deformed.

Usage recommendations

Use appropriate personal protective equipment: eye protection, gloves and dust mask if necessary. Test the brush on a small, inconspicuous area first to confirm compatibility with the material and finish. For delicate surfaces, use lower speeds and light pressure; for heavier rust or paint, increase speed gradually and use controlled passes.