Sanding disc with holes 225 mm P180 for orbital sander, GEKO (pack sizes: 10/100/500)

Sanding disc GEKO 225 mm grit P180 with dust-extraction holes is an abrasive accessory designed for orbital sanders that accept 225 mm hole-pattern discs. With a P180 grit it provides fine abrasion suitable for smoothing and light finishing on wood, varnish, filler and paint layers. The disc's perforated design supports dust extraction when used with compatible sanders and dust-collection systems, helping to maintain a clearer work surface and prolong abrasive life. Available in pack sizes of 10, 100 or 500 for single-project use or larger jobsite supplies.

Advantages

The GEKO 225 mm P180 sanding disc delivers uniform fine-grit abrasion across a broad surface area, allowing controlled material removal and consistent finish quality. Pre-punched dust-extraction holes reduce airborne dust and improve visibility while sanding when connected to a dust-extraction system. The disc is suitable for rapid replacement thanks to standard sizing for orbital sanders that accept 225 mm discs, and is offered in multiple pack quantities to match different consumption needs.

Suitable for

• Smoothing wooden surfaces and preparing for varnish or paint
• Light sanding of existing varnish, lacquer or enamel layers
• Feathering filler or putty before final finishing
• General finishing and surface preparation on furniture and panels

Key specifications

• Diameter: 225 mm
• Abrasion grade: P180 (fine)
• Perforation: dust-extraction hole pattern compatible with 225 mm orbital sanders
• Intended materials: wood, varnish, fillers, paints
• Pack sizes available: 10, 100, 500 pieces

How to use

Attach the sanding disc to an orbital sander that accepts 225 mm discs and has a matching hole pattern for dust extraction. Ensure the backing pad is clean and properly secured, then align the disc so the holes correspond to the sander's extraction ports. Start sanding at low to moderate speed and apply even light pressure; use overlapping passes to achieve a uniform surface. Replace the disc when the abrasive surface is worn or clogged to maintain consistent results.

Usage recommendations

For best results on wood and painted surfaces, begin with a coarser grit if heavy material removal is required and finish with the P180 disc for smoothing and preparation prior to coating. Use with a compatible dust-extraction system to reduce airborne dust and extend abrasive life. Store discs flat in a dry environment to prevent deformation.