Sandpaper water-resistant disc with hook-and-loop 125 mm P1000 GEKO 50/1000

Water-resistant sandpaper disc GEKO with 125 mm diameter and P1000 grit is intended for fine sanding and surface finishing. The disc is designed with a hook-and-loop backing to fit standard 125 mm orbital and rotary sanders. It is suitable for wet or dry sanding on metal, wood and composite surfaces, for smoothing paint edges, preparing surfaces for polishing, and refining primer or filler layers.

Advantages

The hook-and-loop fastening ensures quick and secure disc changes without additional tools. Water-resistant abrasive material extends performance when used with water or other lubricants, reducing clogging and heat build-up. P1000 grit provides a fine abrasive action that leaves a smooth surface ready for polishing or final coating. The 125 mm diameter is compatible with many common sanders, enabling even wear and stable handling during use.

Suitable for

• Fine sanding and finish work on painted surfaces
• Wet sanding for automotive and metal refinishing
• Smoothing wood between coats and before varnishing
• Refining fillers and primers prior to polishing
• Composite surface finishing where moisture is present

Key specifications

• Diameter: 125 mm
• Abrasive grit: P1000 (very fine)
• Backing: hook-and-loop (Velcro compatible)
• Water resistance: suitable for wet and dry sanding
• Quantity format: supplied in a multi-pack configuration

How to use

Attach the disc to a compatible 125 mm sander using the hook-and-loop backing, ensuring proper alignment before switching the tool on. For wet sanding, apply a light water film or suitable lubricant to the surface to reduce clogging and achieve a smoother finish; for dry sanding, monitor dust buildup and replace discs as they clog. Operate the sander at the manufacturer’s recommended speed and apply even, moderate pressure to avoid over-sanding. After use, rinse and dry discs if they are to be reused for wet applications.

Usage recommendations

Use P1000 grit for final smoothing stages, feathering paint edges, and preparing surfaces for polishing or clear coats. When wet sanding, change water frequently and avoid excessive pressure to prolong disc life and maintain consistent finish quality.