Paint Mixer GEKO 80x415 mm HEX shaft for paints, adhesives and lacquers

The GEKO Paint Mixer with an 80 mm mixing head and 415 mm total length is a tool designed for efficient blending of paints, adhesives and lacquers. The mixer features a HEX shaft connection for secure attachment to drills and drivers that accept hexagonal shanks. Its compact mixing head diameter and extended length make it suitable for use in standard buckets and containers, enabling uniform dispersion of pigments, fillers and solvents in viscous liquids.

Advantages

The HEX shaft ensures quick, slip-resistant connection to compatible power tools, reducing downtime during repetitive mixing tasks. The 80 mm mixing head provides effective agitation for medium to high-viscosity materials while the 415 mm overall length reaches deeper into containers to minimize air entrapment and ensure thorough homogenization. The construction resists bending under typical mixing loads and is easy to clean after use.

Suitable for

• Mixing water- and solvent-based paints in buckets and tubs
• Preparing adhesives, mastics and sealants before application
• Blending lacquers and varnishes to uniform consistency
• DIY and professional renovation tasks requiring consistent mixes

Key specifications

• Mixing head diameter: 80 mm
• Total length: 415 mm
• Shaft type: HEX connection compatible with hex-shank drills
• Intended use: paints, adhesives and lacquers; suitable for medium to high-viscosity materials

How to use

Mount the mixer securely into the drill chuck or quick-change hex holder, ensuring the connection is fully seated. Place the mixing head into the container so it is submerged in the material, start the drill at low speed to avoid splashing, and gradually increase speed until the material achieves a consistent texture. Move the mixer up and down slowly to incorporate all components and prevent trapped air. After mixing, run the drill briefly at low speed to clear excess material from the head before removing it from the container, then clean the mixer promptly according to the material manufacturer's recommendations.

Usage recommendations

The mixer is intended for use with drills that accept HEX shanks; select a drill with variable speed and sufficient torque for viscous materials. Use appropriate personal protective equipment such as gloves and eye protection when mixing chemical products. Clean immediately after use to prevent material buildup and inspect the shaft and head for wear before each use.