Paint Spray Gun GEKO HVLP professional with 4 nozzles 1.4 / 1.7 / 2.0 / 2.5 mm

The GEKO HVLP professional paint spray gun with four nozzles (1.4 / 1.7 / 2.0 / 2.5 mm) is a tool for controlled application of lacquers, varnishes and paints in automotive, furniture and renovation tasks. The gun uses HVLP (High Volume Low Pressure) technology to reduce overspray and increase transfer efficiency, enabling precise coverage and more efficient material use. Supplied with four interchangeable nozzles, it allows adjustment of spray pattern and material flow to match different coating types and layer thicknesses.

Advantages

The HVLP system delivers high transfer efficiency with reduced overspray and lower air pressure at the nozzle for a controlled finish. Interchangeable nozzles in sizes 1.4, 1.7, 2.0 and 2.5 mm provide versatility across thin lacquers and thicker paints, enabling consistent atomization and uniform application. The design supports precise control of spray pattern and material feed, which helps achieve even coverage and reduces waste. The gun is suitable for repeated professional use where consistent results and efficient material consumption are required.

Suitable for

• Automotive refinishing and touch-up painting
• Furniture coatings, varnishing and lacquering
• Interior renovation and wall/ceiling painting of trim and fixtures
• Small to medium workshop projects requiring different coating viscosities

Key specifications

• Spray technology: HVLP (High Volume Low Pressure) for reduced overspray
• Nozzle sizes: 1.4 mm, 1.7 mm, 2.0 mm, 2.5 mm (interchangeable)
• Compatible materials: lacquers, varnishes and a range of solvent- and water-based paints
• Adjustable spray pattern and material flow for fine to heavy coats
• Intended use: professional spraying tasks in automotive, furniture and renovation work

How to use

Select the nozzle size appropriate for the coating material and desired film thickness: smaller nozzles for thin lacquers and higher atomization, larger nozzles for thicker paints and primers. Prepare the paint according to manufacturer instructions (mixing and thinning as required) and strain to remove contaminants. Set air pressure to the recommended range for HVLP operation and adjust the gun's material flow and spray pattern controls to achieve an even fan and droplet size. Test spray on a scrap surface and fine-tune settings before proceeding with the main work. Clean the gun and nozzles thoroughly after use to prevent clogging and maintain performance.

Usage recommendations

Use protective equipment compatible with painted surfaces and solvents, such as respiratory protection, gloves and eye protection. For best results, follow paint manufacturer's viscosity and thinning guidelines and perform test passes to confirm coverage and finish. Regular maintenance, including cleaning and inspection of the nozzles, seals and air passages, will extend the service life and preserve spray quality.