Roller for Putty 18 cm x 7 cm, 6 mm Core Diameter – GEKO

GEKO roller for putty with an 18 cm working width and 7 mm pile height is designed for applying and smoothing finishing compounds in interior renovation. The roller fits standard frames with a 6 mm core and is suitable for levelling surfaces, distributing putty and aiding plaster or skim-coat operations on walls and ceilings.

Advantages

The roller combines an 18 cm coverage width with a 7 mm pile that ensures even distribution of finishing compounds and good contact with slightly textured surfaces. Compatibility with a 6 mm core allows use with common roller frames, reducing the need for special adapters. The pile material is selected to resist matting during repeated use and to provide consistent results when applying putties, adhesives or skim coats.

Suitable for

• Applying putty and finishing compounds on interior walls and ceilings
• Smoothing and levelling plaster or skim coats
• Distributing adhesives or repair mortars on small- to medium-size surfaces
• Renovation and patching tasks in residential and commercial interiors

Key specifications

• Working width: 18 cm
• Pile height: 7 mm
• Core diameter compatibility: 6 mm
• Intended use: interior finishing, putty and plaster application
• Suitable for: walls and ceilings

How to use

Fit the roller onto a frame with a 6 mm core and ensure it is seated securely before use. Load the roller evenly with putty or finishing compound and apply with steady, overlapping strokes to achieve a uniform layer. For best levelling results, maintain consistent pressure and work from one area to the next while the material is still workable. Clean the roller after use according to the compound manufacturer's instructions to preserve pile performance.

Usage recommendations

For even coverage, apply material in thin layers and repeat passes as needed rather than depositing excessive compound in a single stroke. Use the roller on properly prepared, dry surfaces and test on a small area if working with new materials to confirm compatibility and finish quality.