Electric hoist GEKO Vinča 150/300 kg 12/6 m 600 W

Electric hoist suitable for garages and workshops. Rated safe working load is 150 kg with a single-line configuration and a lifting height of 12 m. Using the additional hook and pulley converts it to a double-line configuration, doubling the capacity to 300 kg with a 6 m lifting height. Lifting speed is 10 m/min in single-line mode and 5 m/min in double-line mode. Unit includes an emergency stop and thermal protection.

Advantages

The hoist offers flexible operation with single- and double-line configurations to adapt lifting height and capacity to different tasks. Compact design and IP54 protection level make it suitable for workshop and garage environments. Built-in safety features such as an emergency stop and thermal overload protection increase operational safety.

Key specifications

• Capacity: 300 kg (double line) / 150 kg (single line)
• Voltage: 230 V / 50 Hz
• Input power: 600 W
• Insulation class: B
• Protection rating: IP54
• Lifting height: 6 m (double line) / 12 m (single line)
• Lifting speed: 5 m/min (300 kg) / 10 m/min (150 kg)
• Duty cycle: S3 20% 10 min
• Rope diameter: 4 mm

How to use

Install the hoist according to the manufacturer's mounting instructions on a suitable support capable of bearing the rated loads. Choose single-line mode for maximum lifting height (12 m) and 150 kg capacity, or fit the supplied hook and pulley to switch to double-line mode for 300 kg capacity at 6 m height. Connect the unit to a 230 V / 50 Hz power supply and verify correct wiring. During operation use the control switch to lift and lower loads, monitor the rope condition and avoid exceeding the rated capacity. Allow the thermal protection to cool the motor if it activates.

Rekomendations

Regularly inspect the lifting rope, hooks and mounting points before use. Do not exceed the specified capacity and follow local safety regulations when lifting loads.