Cutting Disc for Metal GEKO G00007 — 400 x 4 x 32 mm

The GEKO G00007 cutting disc for metal, sized 400 x 4 x 32 mm, is an abrasive wheel designed for cutting steel and other ferrous materials. It fits angle grinders and cutting machines with a 32 mm bore and is intended for professional and workshop use where a large-diameter, heavy-duty disc is required. The disc provides straight, controlled cuts in sheet metal, profiles and pipes and is suitable for operations that demand a robust cutting tool for thick or large workpieces.

Advantages

The large 400 mm diameter increases cutting depth and reduces the number of passes required for thick sections, while the 4 mm thickness offers stability and reduced vibration during use. The 32 mm mounting hole ensures compatibility with machines that accept oversized discs. The abrasive composition is formulated for ferrous metals to deliver consistent cutting performance and longer life under typical workshop conditions.

Suitable for

• Cutting steel sheet metal and steel plates
• Cutting profiles, channels and angle iron
• Cutting steel pipes and tubing
• Use on large-capacity angle grinders and stationary cutting machines with 32 mm arbor

Key specifications

• Diameter: 400 mm
• Thickness: 4 mm
• Bore (mounting hole) diameter: 32 mm
• Material suitability: steel and other ferrous metals
• Intended use: abrasive cutting (not for grinding or sanding)

How to use

Install the disc on a compatible angle grinder or cutting machine with a 32 mm arbor following the machine manufacturer's mounting instructions. Ensure the disc is rated for the machine's maximum rotational speed and that flanges and securing nuts are tightened correctly. Position the workpiece securely and use steady, even pressure to guide the disc through sheet metal, profiles or pipes. Allow the abrasive to perform the cutting; avoid excessive force or lateral pressure that could damage the disc or cause unsafe conditions.

Usage recommendations

Before each use, inspect the disc for cracks, chips or other damage and replace if any defects are found. Always wear appropriate personal protective equipment: safety goggles or face shield, hearing protection, gloves and protective clothing. Use a cutting guard when available, and follow safe operating speeds, recommended by the tool manufacturer, to avoid over-speeding the disc.