Circular Saw Blade GEKO 400 x 32 mm 60T carbide-tipped (G00161)

Carbide-tipped circular saw blade GEKO 400 x 32 mm 60T is engineered for precise cutting of solid wood and wood-based panels. The 400 mm diameter and 60 fine teeth provide smooth crosscuts and rip cuts with reduced tear-out, delivering cleaner edges on timber, plywood and laminated board. The blade fits machines with a 32 mm bore and is intended for professional and workshop woodworking applications where accuracy and edge quality are important.

Advantages

The carbide-tipped teeth retain sharpness longer than plain-steel blades and provide consistent cutting performance over extended use. The fine 60T tooth count improves surface finish and minimizes splintering on both crosscutting and ripping operations. Balanced construction reduces vibration during high-speed rotation, improving cutting accuracy and protecting both material and machine. The blade’s design supports efficient chip removal to maintain cut quality.

Suitable for

• Crosscutting softwood and hardwood
• Rip cutting boards and planks
• Cutting plywood, MDF and laminated panels
• Workshop and professional woodworking machines with 32 mm bore

Key specifications

• Diameter: 400 mm
• Bore diameter: 32 mm
• Tooth count: 60 teeth
• Tooth material: carbide-tipped
• Intended materials: solid wood, plywood, MDF, laminated boards

How to use

Install the blade on a compatible circular saw or table saw with a 32 mm arbor, ensuring the saw is disconnected from power before mounting. Verify the blade rotation direction matches the saw’s marking and tighten the arbor flange according to the machine manufacturer’s torque recommendations. Set appropriate feed rates and blade height for the material and operation: slower feed for smoother crosscuts on thin panels, steady feed for ripping thicker stock. Wear appropriate personal protective equipment and follow the saw and blade safety instructions.

Usage recommendations

For best results, use this 60-tooth carbide blade for finishing cuts and where reduced tear-out is required. Keep the blade clean and free of pitch buildup; periodically inspect and replace when teeth show signs of chipping or excessive wear. Use correct machine settings and maintain steady feed to extend blade life and achieve optimal edge quality.