Polishing discs GEKO G00326 150 x 45 mm M14 red foam for angle grinders

Polishing discs GEKO G00326 150 x 45 mm M14 Red Foam is a universal multi-layer foam polishing pad designed for blending transitions and polishing various lacquer coatings. The foam structure retains water internally, helping to reduce heat build-up on the polished surface. It is intended for use with medium-abrasive polishing compounds. Disc diameter is 150 mm with a thickness of 45 mm and an M14 threaded attachment.

Advantages

The multi-layer foam construction provides even pressure distribution and good conformity to curved surfaces while maintaining moisture for cooling. The internal water retention reduces surface temperature during polishing, which helps protect delicate lacquer finishes. The M14 threaded connection ensures compatibility with common angle grinders and polishers. Designed for medium-abrasive pastes, the pad balances cutting ability and finish quality.

Suitable for

• Blending transitions between painted panels
• Polishing lacquer coatings on cars and motorcycles
• Removing light scratches and swirl marks with medium-abrasive compounds
• Final polishing steps before applying sealants or waxes

Key specifications

• Brand: GEKO
• Model / MPN: G00326
• EAN: 5901477125423
• Diameter: 150 mm
• Thickness: 45 mm
• Attachment: M14 threaded
• Color: Red foam
• Intended abrasive level: medium

How to use

Mount the polishing disc securely on an M14-compatible polisher or angle grinder. Use a medium-abrasive polishing paste appropriate for the surface and apply a small amount to the pad or the workpiece. Start polishing at low speed to spread the compound, then increase speed as needed while keeping the pad flat against the surface and using light, even pressure. Periodically check the surface and condition of the pad; keep the pad moist if required to manage heat and avoid prolonged high-speed contact in one spot.

Usage recommendations

Use with medium-abrasive compounds only. Test on an inconspicuous area before full application to confirm compatibility with the lacquer. Replace the pad when foam shows significant wear or contamination to avoid defects in the finish.