Wire cup brush GEKO G00619-1, brass wire, 60 mm, with shank

GEKO wire cup brush G00619-1 with brass-plated steel wire and a 60 mm cup diameter is supplied with a shank for direct attachment to drills and rotary tools. It is engineered for mechanical surface cleaning, paint and rust removal, deburring and light surface preparation on metal and other hard materials. The compact cup shape and included shank give controlled access to edges and concave areas while maintaining consistent brush contact during rotation.

Advantages

The brass-plated wire provides effective cleaning performance while reducing the risk of sparking and minimizing surface marring compared with harder steel-only wires. The 60 mm cup offers a balance between working width and maneuverability for workshop and maintenance tasks. The supplied shank enables quick mounting in standard drill chucks and rotary tool collets without additional adapters. The brush construction is suitable for sustained rotational speeds common in handheld and bench-mounted drills.

Suitable for

• Removing rust and loose paint from ferrous metal surfaces
• Deburring and edge rounding on small metal parts
• Cleaning weld seams and preparing joints for finishing
• Surface preparation prior to priming or coating
• Light cleaning of hard non-ferrous materials and castings

Key specifications

• Cup diameter: 60 mm
• Filament type: brass-plated wire
• Attachment: integrated shank for drill/rotary tool
• Intended use: mechanical brushing, rust and paint removal, deburring, light surface preparation
• Compatibility: handheld drills and rotary tools with matching chuck/collet size

How to use

Mount the cup brush securely in the drill or rotary tool chuck and tighten according to the tool manufacturer's instructions. Start at low speed to confirm secure fitting and correct rotation direction, then increase speed as appropriate for the material and task. Apply steady, moderate pressure—avoid forcing the brush to prevent excessive wear or damage to the workpiece. Move the brush across the surface with smooth, controlled strokes to achieve even cleaning and to reach edges or concave areas. After use, inspect the wire filaments for deformation and discard the brush if excessive wear or breakage is evident.

Usage recommendations

Use eye protection, gloves and appropriate dust control. Test on a small inconspicuous area before full-scale use to verify the effect on the substrate. Match rotational speed and pressure to the material: lower speeds and lighter pressure for thin or soft substrates, higher speeds and firmer pressure for heavy rust or scale removal on robust metal.