Circular Saw Blade GEKO G33123 for Aerated Concrete 700 mm, 34/34T, Teflon Coated, 65Mn

GEKO G33123 circular saw blade is made for cutting aerated concrete and similar lightweight masonry materials. With a 700 mm diameter and a 34/34 tooth configuration, the blade is manufactured from 65Mn spring steel and finished with a Teflon coating to reduce friction and limit material adhesion. The design supports consistent, accurate cuts when used on compatible construction and masonry circular saws intended for large-diameter blades.

Advantages

The Teflon coating reduces build-up on the cutting surface and lowers friction for smoother operation during prolonged use. Construction from 65Mn steel provides a balance of hardness and toughness suited to the demands of cutting aerated concrete. The 34/34 tooth layout is optimized to produce clean, controlled cuts in lightweight block materials while supporting efficient material removal and heat dissipation.

Suitable for

• Cutting aerated concrete (gas concrete) blocks and panels
• Masonry circular saws designed for large-diameter blades
• Construction sites and prefabrication workshops working with lightweight concrete elements

Key specifications

• Diameter: 700 mm
• Tooth configuration: 34/34 teeth
• Material: 65Mn spring steel
• Coating: Teflon (low-friction, anti-adhesion)
• Intended material: aerated concrete and similar lightweight masonry

How to use

Install the blade on a compatible masonry or construction circular saw following the saw manufacturer's instructions and safety guidelines. Ensure the blade is mounted with the correct direction of rotation and that flange and nut torque meet the tool specifications. Use appropriate feed rates and blade speeds recommended for aerated concrete to avoid excessive wear or overheating. Wear required personal protective equipment and secure the workpiece before cutting.

Usage recommendations

For best results, maintain steady feed pressure and allow the blade to do the work rather than forcing cuts. Periodically inspect the blade for wear or damage, and replace it when cutting quality degrades. Keep blade and saw guards clean and free of accumulated material to preserve cutting performance.