GEKO wood paddle drill bit 8 x 152 mm HEX, model G37296

GEKO wood paddle drill bit 8 x 152 mm HEX, model G37296 is a spade-style drill bit intended for creating straight, clean holes in softwoods, hardwoods, plywood and chipboard. The bit measures 8 mm in cutting diameter and 152 mm in overall length, and features a hex shank for stable engagement in standard chucks and quick-change holders. It is suitable for use with handheld electric drills and cordless drivers commonly used in carpentry, installation and general woodworking tasks.

Advantages

The paddle design provides efficient chip removal and a flat-bottomed hole profile, while the 8 mm cutting diameter and 152 mm length allow reaching through thin panels or creating pilot holes in thicker workpieces. The HEX shank enhances grip in the drill chuck and reduces slippage during operation, enabling faster bit changes and reliable torque transfer. The bit is designed to produce clean holes in both soft and hard wood-based materials when used at appropriate speeds and feed rates.

Suitable for

• Drilling holes in softwood and hardwood
• Cutting through plywood and chipboard
• Carpentry, joinery and on-site installation work
• Use with handheld electric drills and cordless drivers

Key specifications

• Cutting diameter: 8 mm
• Overall length: 152 mm
• Shank type: HEX (hexagonal)
• Bit style: paddle / spade
• Material compatibility: softwood, hardwood, plywood, chipboard

How to use

Mount the GEKO paddle drill bit securely in the drill chuck or a compatible quick-change adapter, ensuring the hex shank seats fully. Select a drilling speed appropriate for the material—slower speeds for hardwood, higher speeds for softwoods—and position the point on the marked location. Apply steady, moderate pressure while drilling and allow the bit to clear chips periodically to avoid clogging and overheating. Withdraw the bit gently once the hole is complete.

Usage recommendations

For best results, use the GEKO 8 x 152 mm paddle bit with a drill that provides stable RPM control. When working with hardwood or thick panels, start with a pilot hole or reduce feed pressure to prevent splintering. Wear appropriate eye protection and follow standard safety procedures for power drilling.