Drill bit GEKO G37298 10 x 152 mm paddle / spade bit with HEX shank for wood

GEKO G37298 paddle (spade) drill bit, 10 x 152 mm, is designed for drilling larger-diameter holes in wood. The flat paddle blade clears chips efficiently while the central point helps position the bit accurately. The HEX shank ensures secure engagement in chucks and quick-change adapters, making the bit suitable for both manual and powered drilling tools used in carpentry, rough framing, wiring and plumbing installations.

Advantages

The paddle geometry provides fast chip evacuation and stable drilling in soft and hard wood. The central point reduces wandering at the start of a hole and the sharp cutting edges produce clean entry holes. The HEX shank minimizes slippage under torque and allows quick bit changes in compatible drill chucks and holders. The 152 mm overall length enables drilling through thick timber and construction members without frequent repositioning.

Suitable for

• Drilling through timber beams, studs and planks
• Creating holes for electrical conduit and cable routing
• Making openings for plumbing pipes and fittings
• General carpentry, framing and rough construction tasks

Key specifications

• Diameter: 10 mm
• Overall length: 152 mm
• Type: paddle (spade) bit with central point
• Shank: HEX shank for secure grip in chucks and quick-change adapters
• Material: hardened steel construction suitable for wood drilling

How to use

Secure the drill bit firmly in a compatible chuck or quick-change adapter so the HEX shank is fully engaged. Mark the drilling point on the wooden workpiece and, where required, clamp the workpiece to prevent movement. Start drilling at low speed to allow the central point to engage and then increase speed while applying steady, even pressure. Withdraw the bit periodically when drilling deep holes to clear chips and avoid overheating. After use, clean wood debris from the blade and shank before storage.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses and hearing protection. For cleaner holes, consider backing the workpiece with sacrificial timber when drilling through thin boards. Avoid excessive side load to prevent paddle bending; use progressive drilling and correct feed pressure for best results.