Wood Paddle Drill Bit GEKO G37302 14 x 152 mm HEX shank

Wood Paddle Drill Bit GEKO G37302 14 x 152 mm HEX shank is a spade-style bit designed to create clean, wide holes in soft and hard wood, plywood and similar panel materials. The flat paddle blade removes material quickly while the centering point keeps the bit aligned during drilling. The HEX shank provides secure fitment in hand drills and impact drivers with compatible chucks, enabling faster bit changes and reduced slippage.

Advantages

This paddle drill bit combines a sharp centering point with a wide flat blade for efficient chip evacuation and smooth hole edges. The robust body construction reduces bending under moderate load and the HEX shank improves torque transfer and grip in quick-change chucks. The geometry of the cutting edges is tuned for fast drilling in timber and board materials while helping maintain hole roundness.

Suitable for

• Drilling large-diameter through-holes in softwood and hardwood
• Creating holes in plywood, particleboard and laminated panels
• Installing door hardware, running cables or pipes through timber
• Quick hole-making tasks with hand drills or impact drivers

Key specifications

• Cutting diameter: 14 mm
• Total length: 152 mm
• Shank type: HEX shank for improved grip in chucks
• Tip: centering point for accurate positioning
• Blade style: flat paddle (spade) blade for fast material removal
• Suitable materials: soft and hard wood, plywood, laminated boards

How to use

Secure the paddle drill bit in a compatible hand drill or impact driver with a HEX chuck and tighten the chuck firmly. Mark the drilling position and place the centering point on the mark to start. Apply steady, even pressure and run the drill at moderate speed to allow the paddle blade to cut and evacuate chips; higher speeds may be used for softer woods while lower speeds help with hardwoods and laminated materials. Withdraw the bit periodically to clear chips when drilling deep holes, and support thin panels near the hole to minimise splintering.

Usage recommendations

For best results, use appropriate drilling speeds for the material, clamp workpieces securely, and consider backing the workpiece with scrap wood to reduce exit splintering. Inspect the bit for wear before use and replace it if cutting edges become blunt or damaged. The HEX shank ensures a firm grip in quick-change chucks, but always follow the drill manufacturer's safety guidance when operating power tools.