Drill bit GEKO G37314 paddle (spade) 26 x 152 mm HEX shank for wood

Paddle (spade) drill bit GEKO G37314 26 x 152 mm with HEX shank is designed for drilling clean, wide holes in soft and hardwoods. The flat paddle blade removes material quickly while the centering point helps start holes accurately. The HEX shank provides a secure grip in drill chucks and quick-change holders, reducing slippage during higher torque operations. This tool is suitable for manual and powered drilling in carpentry, plumbing, electrical installation and general woodwork where fast, efficient hole making is required.

Advantages

The paddle design enables rapid chip evacuation and efficient removal of wood, shortening drilling time for larger diameter holes. The pointed tip improves centering and reduces wandering at the start of the hole. A HEX shank increases stability in chucks and quick-change adaptors, delivering reliable torque transfer and easier bit changes. The overall construction balances cutting performance and durability for routine woodworking tasks.

Suitable for

• Drilling clearance and rough holes in softwood and hardwood
• Installing door hardware, hinges and fitting large-diameter fasteners
• Creating openings for plumbing pipes and electrical conduits
• General carpentry and joinery work requiring fast hole removal

Key specifications

• Diameter: 26 mm
• Overall length: 152 mm
• Bit type: paddle (spade) with centering point
• Shank type: HEX shank for secure grip
• Material application: designed for use in soft and hardwood

How to use

Mark the drilling position and secure the workpiece to prevent movement. Use a suitable drill or driver that accepts a HEX-shank bit and set an appropriate speed for wood drilling — generally medium to high speed for clean cutting. Align the centering point with the mark and apply steady pressure until the paddle blade cuts through the material. Withdraw the bit occasionally to clear chips and avoid clogging when drilling deep or long holes. After use, clean wood debris from the blade and shank to maintain performance.

Usage recommendations

For best results, match drilling speed and feed pressure to the wood type: lower speeds for dense hardwoods and moderate pressure; higher speeds for softwoods. Use clamps or a vise to secure workpieces and a backing support to reduce splintering on exit. Periodically sharpen or replace worn bits to maintain clean hole edges and efficient chip removal.