Drill Bit GEKO SDS PLUS 20 × 210 mm — rotary SDS-plus masonry bit, single pack

GEKO SDS PLUS 20 × 210 mm is a rotary masonry drill bit with an SDS-plus shank, designed for use with SDS-plus rotary hammer drills. With a 20 mm drilling diameter and a 210 mm overall length, the bit is intended for making holes in concrete, brick and natural stone. The SDS-plus mounting ensures secure retention in compatible hammer drills and efficient transfer of percussive energy for faster penetration into hard materials.

Advantages

The GEKO SDS PLUS bit provides reliable percussion drilling performance and efficient dust and debris removal thanks to its flute geometry. Its standard SDS-plus shank delivers quick and secure fitting in hammer drill chucks, reducing bit wobble during operation. The 20 mm diameter offers a balance between hole size and structural stability for common anchoring and fastening tasks in construction and renovation.

Suitable for

• Drilling anchoring holes for bolts and anchors in concrete
• Creating holes for pipe or conduit entries in masonry
• General construction and renovation drilling in brick and stone
• Preparing openings for fasteners, dowels and wall plugs

Key specifications

• Drill diameter: 20 mm
• Overall length: 210 mm
• Shank type: SDS-plus
• Intended materials: concrete, brick, natural stone
• Application: rotary hammer / percussion drilling

How to use

Select an SDS-plus compatible rotary hammer drill and insert the bit into the chuck according to the drill manufacturer's instructions until it locks. Mark and position the drill at the required drilling location, start at low speed to create a guiding recess if needed, then apply steady axial force and engage the hammer function for drilling into concrete or masonry. Periodically withdraw the bit to clear dust and debris from the hole and prevent overheating.

Usage recommendations

Use appropriate personal protective equipment including eye and hearing protection and a dust mask when drilling masonry. Match the hole depth and diameter to the requirements of anchors or fasteners. For long or deep holes, consider using a lubricant or intermittent drilling and cleaning cycles to prolong bit life and maintain drilling efficiency.