Tile drill bit GEKO G65005 5 mm for ceramic and porcelain tiles

Diamond core drill bit for wet drilling in ceramic, marble, porcelain and hard tiles. The drill bit has a 5 mm cutting diameter and a 6 mm diamond layer, suitable for creating precise small holes in tiled surfaces when used with a wet drilling method.

Advantages

The GEKO G65005 tile drill bit features a diamond cutting edge for efficient material removal and extended tool life when used with cooling water. Its 5 mm diameter provides accurate, clean holes with minimal chipping on glazed surfaces. The 6 mm diamond layer ensures consistent performance on hard ceramic, porcelain and natural stone tiles.

Suitable for

• Drilling small-diameter holes in ceramic wall and floor tiles
• Installing fixtures in porcelain or marble-tiled surfaces
• Creating holes for anchors, plumbing or electrical pass-throughs in hard tiles

Key specifications

• Brand: GEKO
• Model / MPN: G65005
• EAN: 5901477131745
• Cutting diameter: 5 mm
• Diamond layer thickness: 6 mm
• Intended use: Wet drilling in ceramic, porcelain, marble and hard tiles

How to use

Mark the drilling point on the tile and secure the workpiece to prevent movement. Use a drill with a suitable chuck and keep the drill bit perpendicular to the surface. Apply light pressure and operate the drill at low to medium speed while continuously supplying water to cool the bit and remove debris. Withdraw occasionally to clear slurry and avoid overheating. After reaching the required depth, stop the drill and rinse the hole.

Usage recommendations

Use only wet drilling with continuous water flow to cool the diamond layer and extend tool life. For best results on glazed tiles, start with a pilot spot or use masking tape to reduce slipping. Do not apply excessive force; let the diamond edge cut the material.