Leave your address - as soon as the price of the product goes down, you'll know about it right away
Tile drill bit GEKO G65035 35 mm for ceramic and porcelain tiles
Tile drill bit GEKO G65035 35 mm for ceramic and porcelain tiles
In cart {{totalProductsCount}} item(s)
Your cart is empty
Tile drill bit GEKO G65035 35 mm for ceramic and porcelain tiles
Leave your address - as soon as the price of the product goes down, you'll know about it right away
Tile drill bit GEKO G65035 35 mm for ceramic and porcelain tiles
Tile drill bit GEKO G65035 35 mm for ceramic and porcelain tiles
Diamond hole saw for wet drilling in ceramic tiles, marble, porcelain and hard tiles. The drill bit has a diameter of 35 mm and a 6 mm diamond segment, designed for use with water cooling to extend tool life and reduce dust.
The GEKO G65035 delivers precise, clean holes in hard tile materials thanks to its diamond cutting edge. The 6 mm diamond layer ensures faster cutting and improved durability compared with standard carbide bits. Wet drilling reduces heat buildup and prolongs the service life of the bit while minimizing chipping on fragile surfaces.
Secure the workpiece and mark the drilling position. Use the drill bit with a compatible rotary drill or drill press at low to moderate speed. Apply continuous water cooling during drilling to keep the cutting edge cool and to remove debris. Start drilling at a slight angle to create a guide then bring the drill to a perpendicular position once the cut has started. Apply steady, moderate pressure—do not force the bit.
Wear eye protection and gloves. Use only with water cooling and avoid dry drilling. For reinforced or very thick stone, use intermittent drilling and allow cooling pauses to prevent overheating.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}