Paint Roller GEKO G66235 polyacrylic 10 cm (30 mm pile) core Ø 6 mm — golden thread

GEKO G66235 is a 10 cm polyacrylic paint roller cover with a 30 mm pile height and a 6 mm core diameter, designed with a golden thread weave. It is intended for application of emulsion, acrylic and latex paints on semi-smooth to textured surfaces. The roller cover provides even paint distribution and efficient paint pick-up, and fits standard 6 mm roller frames used in renovation and finishing work.

Advantages

The polyacrylic material offers a balance of durability and softness, allowing consistent coverage without excessive shedding. A 30 mm pile height ensures adequate paint retention for textured and semi-smooth surfaces while maintaining smooth application on flatter areas. The golden thread weave enhances the structural stability of the cover and supports even paint release. The 6 mm core diameter makes the cover compatible with common small roller frames used for corners, trims and narrow surfaces.

Suitable for

• Applying emulsion, acrylic and latex paints
• Painting semi-smooth walls and ceilings
• Working on textured or slightly rough surfaces
• Renovation and finishing tasks in confined or narrow areas

Key specifications

• Material: polyacrylic fabric
• Cover length: 10 cm
• Pile height: 30 mm
• Core diameter: 6 mm
• Weave: golden thread
• Designed for water-based paints (emulsion, acrylic, latex)

How to use

Mount the roller cover onto a compatible 6 mm diameter roller frame and ensure it is securely seated. Before first use, remove loose fibers by lightly rolling on scrap material or rinsing and spinning out excess water. Load the roller evenly with paint by rolling it over a tray grid to achieve uniform saturation. Apply paint using steady, overlapping strokes and maintain moderate pressure to avoid splattering. For textured surfaces, allow the roller to reach its full pile capacity for best coverage, and refill paint as needed to keep application consistent.

Usage recommendations

After each use, rinse the roller cover thoroughly with water until clear, then spin or shake out excess moisture and allow to dry in a ventilated place. Store the cover in a dry environment away from direct sunlight to preserve pile structure and avoid deformation. Replace the cover if pile becomes permanently matted or if excessive shedding occurs, to maintain optimal finish quality.