Paint Roller Sleeve GEKO G66309 polyamide 15 cm nap 30 mm core Ø 6 mm (200)

GEKO G66309 paint roller sleeve is a 15 cm wide polyamide replacement cover with a 30 mm pile height and a 6 mm core diameter designed for application of paints and primers on smooth to semi-rough surfaces. The sleeve is compatible with roller frames that accept a 6 mm arbor and is intended for both interior and exterior painting, renovation and repair work. Its pile length balances paint pickup and release for consistent coverage on walls, ceilings and other flat surfaces.

Advantages

The polyamide fabric provides good durability and resistance to matting, maintaining an even nap over repeated use. With a 30 mm nap the sleeve offers enhanced capacity for holding and spreading medium-viscosity paints and primers while helping to reduce visible roller marks. The 6 mm core diameter ensures a snug fit on standard small-arbor frames, improving rotational stability during application.

Suitable for

• Applying water-based and solvent-based paints on smooth to semi-rough interior walls and ceilings
• Priming surfaces before finishing coats
• Small renovation and repair tasks on exterior surfaces such as façades and garden structures
• Using on small to medium sized roller frames with 6 mm arbors

Key specifications

• Material: polyamide pile
• Working width: 15 cm
• Pile (nap) height: 30 mm
• Core (arbor) diameter: 6 mm
• Suitable surface type: smooth to semi-rough
• Intended use: paints and primers

How to use

Mount the GEKO G66309 sleeve onto a compatible roller frame with a 6 mm arbor, ensuring it fits securely and rotates freely. Load the sleeve evenly in a paint tray or bucket grid, remove excess paint by rolling on the tray edge, and apply using steady overlapping strokes for uniform coverage. For best results, work from top to bottom and maintain a wet edge to avoid lap marks. Clean the sleeve after use according to the paint manufacturer's recommendations to preserve pile structure and extend service life.

Usage recommendations

Before first use, test the sleeve with the intended paint on a small area to confirm finish and coverage. Use with medium-viscosity latex or alkyd paints and follow appropriate drying times between coats. Replace the sleeve when pile shows significant wear or matting to maintain consistent application quality.