GEKO tree-felling saw blade 10" with ABS drive, 40 teeth, model G72209

Replacement saw blade for tree-felling and branch-cutting tasks from GEKO. This 10" (approximately 254 mm) toothed metal blade with 40 teeth is made for saws that accept a 10-inch disc and an ABS drive connection. The blade is intended for cutting and trimming trees and branches in forestry maintenance, arborist work and property tree care where a toothed disc is required for efficient material removal and controlled cutting.

Advantages

The GEKO 10" blade offers a consistent cutting geometry with 40 teeth for balanced material removal and a cleaner cut on wood. Compatibility with ABS drive systems ensures secure mounting and reliable power transfer when used with matching saws. The metal construction provides durability for repeated use in outdoor conditions and realistic resistance to wear when used on typical tree-cutting tasks.

Suitable for

• Tree-felling and trunk cutting with a compatible 10" saw
• Pruning and trimming branches in arborist work
• Property and garden tree maintenance
• Forestry maintenance tasks requiring a toothed metal disc

Key specifications

• Diameter: 10 inches (approx. 254 mm)
• Tooth count: 40 teeth for balanced cutting performance
• Drive interface: ABS-compatible attachment for secure mounting
• Blade type: Toothed metal disc suitable for cutting wood and branches

How to use

Install the blade on a compatible saw that accepts a 10" disc and has an ABS drive interface, following the saw manufacturer's instructions for safe mounting and correct torque values. Verify correct alignment and secure fastening before each use. Operate the saw at recommended speed and feed rate for cutting wood, making steady, controlled passes while allowing the blade to do the cutting without excessive force. Inspect the blade for damage or excessive wear before and after use and replace it when teeth are worn or damaged.

Usage recommendations

Use appropriate personal protective equipment (PPE) including eye protection, hearing protection and cut-resistant gloves. Match the blade to a saw designed for a 10" disc with ABS drive to ensure safe operation. Avoid cutting materials that contain nails, wire or soil to reduce wear and risk of damage. Regularly inspect and, if necessary, sharpen or replace the blade to maintain cutting performance.