Circular Saw Blade GEKO 210 mm x 30 mm, 60 teeth for Wood (model G78133)

GEKO 210 mm x 30 mm circular saw blade with 60 teeth is designed for fine, accurate cutting in timber and wood-based panels. Its 210 mm diameter and 30 mm bore match many circular saws and table saws, offering a balance between cutting speed and finish quality. The 60-tooth configuration reduces splintering and produces smooth edges suitable for visible cabinetry and carpentry work.

Advantages

The blade's fine-tooth geometry provides cleaner crosscuts and rip cuts compared to coarse blades, reducing the need for secondary sanding. High tooth count improves cutting precision and surface finish on plywood, MDF and solid wood. Its standardized 30 mm bore ensures compatibility with a wide range of consumer and workshop saws. The blade construction maintains stable cutting performance during extended use and helps minimise chipping on thin panels.

Suitable for

• Crosscutting solid wood and softwood
• Rip cuts on furniture panels and boards
• Cutting plywood, MDF and laminated panels
• Workshop and on-site carpentry tasks requiring fine finishes

Key specifications

• Diameter: 210 mm
• Bore (arbor) diameter: 30 mm
• Tooth count: 60 teeth
• Material application: wood and wood-based panels
• Suitable tool types: circular saws and table saws with 30 mm arbor

How to use

Mount the blade on a compatible circular saw or table saw with a 30 mm arbor, ensuring the saw is unplugged or the battery removed before installation. Check blade rotation direction and secure the blade flange and nut according to the saw manufacturer's instructions. Adjust cutting depth and fence or guide to the required setting, then make test cuts on scrap material to verify alignment and finish. Use steady feed speed and allow the blade to reach full speed before contacting the workpiece for optimal results.

Usage recommendations

For best results, use appropriate personal protective equipment, a sharp blade and correct feed rate. When cutting veneered or laminated panels, support the workpiece to minimise tear-out. Periodically inspect and clean the blade to prevent resin buildup and replace it when wear or tooth damage affects cut quality.