Sandpaper Roll GEKO 115 mm x 3 m P120 G78445

Sandpaper Roll GEKO 115 mm x 3 m P120 G78445 is a continuous abrasive roll from GEKO designed for sanding and surface preparation tasks. The roll has a width of 115 mm and a length of 3 m with abrasive grit P120, suitable for medium-fine sanding of wood, painted surfaces, plaster/putty and light metal deburring. Supplied as a single continuous strip, the roll can be cut to the required length for handheld use, for use with sanding blocks or for custom-fit applications on belt sanders and other abrasive tools.

Advantages

The continuous roll format allows cutting to bespoke lengths, reducing waste and increasing flexibility for different jobs. P120 grit offers a balance between material removal and surface finish, making it suitable for smoothing rough surfaces while preparing substrates for finishing. The product is compatible with manual sanding and a variety of sanding machines, providing consistent abrasive performance across the roll.

Suitable for

• Sanding and smoothing wooden surfaces
• Removing old paint and preparing painted surfaces for recoat
• Smoothing putty and plaster before finishing
• Light deburring and finishing of soft metals
• Custom abrasive applications and belt sander uses

Key specifications

• Width: 115 mm
• Length: 3 m (continuous roll)
• Abrasion grit: P120 (medium-fine)
• Format: roll suitable for cutting to length
• Intended materials: wood, paint, putty/plaster, light metals

How to use

Measure and cut a length of the sandpaper roll appropriate to the task and the tool being used. For hand sanding, wrap the cut piece around a sanding block or use by hand with even pressure and controlled strokes. For machine use, trim and attach the abrasive to the compatible sanding device following the tool manufacturer's mounting instructions. Use progressive sanding sequences if a smoother finish is required: start with coarser abrasive if needed and finish with the P120 or finer grits. Keep the abrasive clean during use by periodically removing dust from the surface to prolong life and maintain cutting efficiency.

Usage recommendations

Wear appropriate personal protective equipment such as safety glasses, dust mask and gloves. Test on a small area first to ensure the grit produces the desired finish and does not over-remove material. Store the roll in a dry, cool place away from direct sunlight to prevent backing degradation and to maintain abrasive performance.