Abrasive sanding sheet GEKO G78572 P80 105x280 mm (10/1000)

The GEKO G78572 abrasive sanding sheet with P80 grit, sized 105×280 mm, is designed for medium-coarse material removal and surface preparation on wood, painted surfaces, metal and composite materials. Supplied in practical packs suitable for trade or professional use, these sanding sheets are intended for compatible orbital and detail sanders and for manual sanding tasks where a rectangular sheet is required. The P80 abrasive provides an effective balance between cutting speed and surface finish, enabling efficient removal of old coatings, shaping of edges and initial smoothing before finer grits.

Advantages

These sanding sheets offer consistent abrasive performance across the sheet and reliable durability for general-purpose sanding. The standardized 105×280 mm size fits a range of orbital or detail sanders that accept rectangular sheets and is also convenient for hand-held use. The P80 grit level accelerates material removal compared with finer grits while still leaving a controlled scratch pattern that can be finished with subsequent finer abrasives.

Suitable for

• Removing old paint and varnish from wooden surfaces
• Shaping and initial smoothing of soft woods and composites
• Surface preparation of metal before priming or painting
• Sanding between coats during renovation and repair
• Detail sanding with compatible orbital or hand-held sanders

Key specifications

• Grit: P80 (medium-coarse)
• Sheet size: 105 × 280 mm
• Intended substrates: wood, paint, metal, composites
• Packaging: multi-sheet packs suitable for trade or professional use
• Compatibility: designed for rectangular orbital/detail sanders and manual use

How to use

Attach the sanding sheet to a compatible orbital or detail sander following the tool manufacturer's instructions, or hold the sheet by hand for manual work. Start with light to moderate pressure and move the sander along the workpiece in the direction that minimizes visible scratches on the specific material. Regularly inspect the abrasive surface and replace the sheet when cutting efficiency decreases or the abrasive is clogged. For painted or metal surfaces, ensure proper dust extraction or wear appropriate personal protective equipment during use.

Usage recommendations

For best results, begin with the P80 sheet to remove material and old coatings, then progress to finer grits (e.g., P120–P240) for smoothing and finishing. Use consistent speed and pressure, and change sheets when performance drops or when working across different substrates to avoid contamination of softer materials.