Door bumper GEKO GH01007 self-adhesive wall-mounted, Ø 40 mm, white

GEKO GH01007 self-adhesive door bumper is a compact, wall-mounted protective accessory with a 40 mm diameter in white. Designed to absorb impact from door handles and edges, this door bumper reduces marks and wear on painted surfaces and trims. The product provides a simple way to lower slamming noise and protect walls in homes, apartments, offices and light commercial interiors. Installation requires no drilling and is intended for flat, clean surfaces.

Advantages

The door bumper combines a low-profile design with a self-adhesive backing for quick, tool-free installation. Its 40 mm diameter gives a substantial contact area to disperse impact forces while the white finish blends with most interior décors. By preventing direct contact between door hardware and walls, the bumper helps maintain wall finishes and reduces the frequency of touch-up repairs. The adhesive mounting reduces installation time and eliminates the need to patch holes.

Suitable for

• Protecting painted walls and wallpaper from door handle impact
• Reducing noise from doors in apartments and offices
• Light commercial interiors where non-invasive mounting is required
• Temporary or permanent installations on flat, smooth surfaces

Key specifications

• Mounting type: self-adhesive, wall-mounted application
• Diameter: 40 mm
• Color: white
• Function: impact absorption and noise reduction
• Recommended surfaces: painted plaster, smooth wood, metal, laminates and similar flat surfaces

How to use

Prepare the mounting surface by cleaning it with a mild detergent and allowing it to dry completely; ensure the surface is free of dust, grease and loose paint. Peel off the protective film from the adhesive backing, position the bumper at the desired contact point, press firmly for several seconds to ensure adhesion, and allow the adhesive to set according to ambient conditions before subjecting it to repeated impacts. For best results, avoid applying on highly textured, damp or porous surfaces.

Usage recommendations

For long-lasting adhesion, install at room temperature on a smooth, non-porous surface and avoid repositioning after initial contact. Periodically inspect the bumper and adhesive bond; replace if the adhesive shows signs of failure or if the bumper becomes deformed.