Door bumper GEKO model GH01008 — self-adhesive wall-mounted, 60 mm diameter, white

GEKO door bumper model GH01008 is a self-adhesive, wall-mounted protector with a 60 mm diameter in white, designed to reduce damage from door impacts and protect both walls and door hardware. The bumper's compact round shape and neutral white finish make it unobtrusive on most interior surfaces. It installs without drilling, using a pressure-sensitive adhesive backing to provide immediate adhesion to clean, smooth surfaces.

Advantages

The door bumper provides a simple, non-invasive method to prevent wall marks, scuffs and dents caused by door handles and edges. Its soft contact surface cushions impacts to reduce noise and wear on doors and frames. Installation is tool-free and fast, eliminating the need for screws or anchors and preserving painted or tiled surfaces. The white finish offers a discreet look that blends with light-colored walls and trims.

Suitable for

• Residential interior doors (bedrooms, bathrooms, kitchens)
• Apartment and condominium common areas
• Light commercial interiors such as offices, small shops and service rooms
• Areas where drilling is not allowed or not desired

Key specifications

• Type: self-adhesive wall-mounted door bumper
• Shape: circular
• Diameter: 60 mm
• Color: white
• Mounting method: pressure-sensitive adhesive backing (no drilling)
• Primary function: impact cushioning and surface protection

How to use

Ensure the mounting surface is clean, dry and free of dust, grease or loose paint. Position the bumper at the point where the door handle or edge would contact the wall and mark the spot lightly. Peel off the protective liner from the adhesive backing, press the bumper firmly onto the surface for several seconds to ensure contact, and avoid stressing the adhesive for 24 hours to reach optimal bond strength. For best results use on smooth surfaces such as painted drywall, tile, glass or metal.

Usage recommendations

For long-lasting adhesion, avoid applying the bumper to heavily textured or porous surfaces and refrain from installing in areas exposed to continuous moisture. If removed, adhesive residue may remain; use a mild solvent or adhesive remover according to the surface manufacturer's guidance. Periodically inspect the bumper for wear and replace if the cushioning material becomes deformed or the adhesive bond weakens.