Sanding Discs GEKO 125 mm P36 abrasive grit pack — for angle grinders and sanders

GEKO sanding discs, 125 mm diameter with P36 abrasive grit, are engineered for coarse material removal and aggressive surface preparation. These discs are suitable for use with compatible angle grinders and disc sanders and are intended for tasks such as deburring, shaping and preparing metal, wood and painted surfaces prior to painting or welding. Supplied in workshop packs for repetitive use, the discs offer a balance of cutting speed and durability for heavy sanding operations.

Advantages

The P36 abrasive grade provides fast stock removal on a variety of substrates while maintaining a predictable wear rate. The 125 mm size is compatible with many common angle grinders and powered disc sanders, allowing for efficient coverage of flat and contoured surfaces. The construction of the discs ensures consistent abrasive performance and reduced clogging when used on painted or resinous materials.

Suitable for

• Removing rust, scale and paint layers from metal surfaces
• Rapid leveling and shaping of wood and composite materials
• Deburring welded joints and preparing edges for finishing
• Surface preparation prior to painting, priming or welding

Key specifications

• Diameter: 125 mm
• Abrasion grade: P36 (coarse)
• Intended machine types: angle grinders and disc sanders compatible with 125 mm discs
• Primary materials: metal, wood, painted surfaces, composites
• Application: coarse grinding, shaping, deburring, surface preparation

How to use

Fit the 125 mm GEKO sanding disc to a compatible angle grinder or disc sander following the machine manufacturer's mounting instructions and safety procedures. Start at low speed to verify secure attachment, then work progressively across the surface using steady, even strokes. Apply moderate pressure; excessive force can accelerate wear and reduce abrasive life. Move the tool continuously to avoid creating gouges or heat buildup on the workpiece. Replace the disc once cutting performance diminishes or the abrasive surface becomes uneven.

Usage recommendations

Use appropriate personal protective equipment including eye and hearing protection, dust mask or respirator and gloves. For painted or coated surfaces, ensure adequate ventilation and observe local regulations for dust and coating removal. Match the P36 disc to the task — it is most effective for fast material removal and rough profiling; for finer finishing, switch to higher-grit abrasives after initial shaping.