Wood Milling Cutter GEKO 35 x 57.5 mm for Recessed Boxes (model vx5325)

Carbide-tipped wood milling cutter GEKO 35 x 57.5 mm for recessed boxes (model vx5325) is designed to rout precise circular recesses for electrical and junction boxes. Compatible with plunge and hand-held routers, this cutter creates a defined diameter and depth to form flush pockets in timber, plywood and similar wood-based materials. The carbide tip ensures wear resistance and consistent cutting performance during repeated installations.

Advantages

The carbide-tipped cutting edge offers long life and stable performance when working with soft and hardwoods as well as plywood. The cutter’s defined outer diameter and shoulder allow accurate recesses without additional trimming, reducing finishing time. Its geometry provides reliable chip evacuation and steady rotation balance for cleaner cuts and reduced vibration during routing operations.

Suitable for

• Cutting flush recesses for wall-mounted electrical boxes and junction boxes
• Routing pockets for switches, sockets and outlet installations in timber and plywood
• On-site and workshop routing with plunge routers or compatible hand-held routers

Key specifications

• Cutter diameter: 35 mm
• Cutting length / overall depth: 57.5 mm
• Tip material: carbide-tipped edge for improved wear resistance
• Intended materials: timber, plywood and similar wood-based materials
• Machine compatibility: designed for use with plunge routers and hand-held routers

How to use

Secure the router and install the milling cutter according to the router manufacturer’s instructions, ensuring correct collet fit and clamping. Set the router depth so the cutter shoulder produces the required recess depth and perform a test cut on scrap material to confirm diameter and depth. Make controlled passes at appropriate feed rates; avoid excessive feed speed to reduce burn marks and ensure the carbide tip remains effective. Wear appropriate eye and hearing protection and follow safe operating procedures.

Usage recommendations

For best results, perform initial test cuts to confirm fit for the specific box type and material. Use clean, sharp carbide cutters to maintain cutting quality; if tear-out appears on plywood, reduce feed rate or use a backer board. Regularly inspect the cutting edge and replace the cutter when wear affects accuracy or finish.