GEMBIRD ABS 1.75 mm 1 kg filament — Blue for 3D printing

GEMBIRD ABS 1.75 mm 1 kg filament — Blue is a thermoplastic filament designed for FDM/FFF 3D printing. The spool contains 1 kg of blue ABS filament with a nominal diameter of 1.75 mm and spool height of 67 mm. The material is formulated for higher-speed printing, offering improved melt behaviour that supports fast extrusion modes and is compatible with a wide range of desktop and CoreXY 3D printers, including high-speed machines such as Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron models. Use it for durable parts, functional prototypes, housings and mechanical components where heat resistance and strength are important.

Advantages

ABS provides high strength and good toughness while maintaining relatively low density for lighter large-volume prints. This GEMBIRD filament is optimized for improved melting characteristics that facilitate printing at higher speeds, including sport and ludicrous modes on supported printers. It is supplied on a standard 1 kg spool compatible with any printer that accepts 1.75 mm filament and fits systems such as the Bambu Labs Automatic Material System.

Suitable for

• Functional prototypes and engineering models
• Enclosures, housings and mechanical parts
• High-speed printing workflows on compatible printers
• Large-volume prints where lower density is beneficial

Key specifications

• Material: ABS (Acrylonitrile butadiene styrene)
• Filament diameter: 1.75 mm (nominal)
• Spool weight: 1 kg of filament
• Colour: Blue
• Spool height: 67 mm
• Compatibility: Designed for FDM/FFF printers including CoreXY and high-speed models
• Mechanical properties: formulated for high strength and good toughness
• Print behaviour: improved melt properties for higher-speed extrusion

How to use

Load the 1.75 mm filament into any compatible extruder according to your printer manufacturer’s instructions. Use a heated build plate and enclosure if available to reduce warping typical of ABS prints. Select print temperatures and retraction settings appropriate for ABS on your printer and slicer; initial test prints are recommended to fine-tune temperature, fan and speed settings. Ensure the spool spins freely on the holder and that filament path is unobstructed — the spool dimensions fit most standard mounts and automatic material systems that accept 1 kg spools.

Usage recommendations

For best results print with a heated bed (80–110 °C recommended depending on printer and slicer guidance), use an enclosure or reduced cooling to minimise warping, and calibrate extrusion settings before long or high-speed prints. When using automatic material systems or high-speed modes, verify feed and tension settings to prevent slipping or grinding. Store unused filament in a dry place or sealed container to avoid moisture uptake.