Battery pack Gens Ace 22000mAh 22.2V 30C LiPo (TAA22K6S30ASX)

The Gens Ace 22000mAh 22.2V 30C LiPo battery pack is a high-capacity 6S (22.2V nominal) lithium polymer unit intended for prolonged runtimes in applications that accept 6-cell LiPo packs. With a 22000mAh capacity and a 30C continuous discharge rating, this battery provides sustained current output for larger RC models, long-endurance multirotors, and electric platforms that require stable power delivery. The pack includes a standard balance connector for safe cell monitoring and balancing when used with a compatible LiPo charger.

Advantages

This battery offers a large energy reserve for extended operation without frequent recharging and a 30C continuous discharge rating that supports steady current draw during extended flights or runs. The 6S (22.2V) nominal voltage gives higher power potential compared with lower-cell configurations, which can improve efficiency and performance on appropriately designed systems. The included balance connector enables regular cell balancing and monitoring to maintain battery health when charging.

Suitable for

• Large electric RC airplanes and helicopters that accept 6S LiPo packs
• Multirotor drones and UAVs designed for long-endurance flights
• Electric ground vehicles and scale models requiring sustained current
• Applications where long runtime is prioritized over minimal weight

When it may not be suitable

This battery is not suitable for equipment that requires a lower cell count or lower nominal voltage than 6S (22.2V). It may be oversized or too heavy for small-scale models or applications where minimal weight and compact dimensions are critical. Devices that require high C-peak bursts significantly above the continuous 30C rating may need a battery with a higher discharge specification.

Key specifications

• Cell count: 6S (6 cells in series)
• Nominal voltage: 22.2 V
• Capacity: 22,000 mAh
• Continuous discharge rate: 30C
• Chemistry: Lithium polymer (LiPo)
• Includes: standard balance connector for charging and monitoring

How to use

Charge and balance the pack only with a charger designed for 6S LiPo batteries and follow the charger manufacturer’s instructions. Observe safe charging procedures: use a fireproof charging container, do not leave the battery unattended while charging, and charge at an appropriate current rate recommended by the battery or charger. Install the pack securely in the model, ensuring proper ventilation and avoiding sharp edges or compression that could damage the cells. Verify polarity and connector compatibility before connecting to the power system.

What to consider before purchase

• Confirm your device supports 6S (22.2V) nominal voltage and the physical dimensions and weight fit your application
• Verify that a suitable LiPo charger and balance lead connector are available
• Ensure your power system (ESC, motor, wiring) can handle the continuous current draw implied by your use case
• Consider transport and storage regulations for high-capacity LiPo batteries in your region

Usage recommendations

For prolonged battery life, store the pack at a partial charge (around 3.8–3.85 V per cell) if not used for extended periods, perform regular balance charging, avoid deep discharges below safe per-cell voltages, and inspect the pack for swelling or damage before each use. Use a compatible balance charger and follow manufacturer guidance for charge rates and safety.