Sanding belt Glob 35 x 650 mm, abrasive cloth P80, model GLOB-PAS-035-650-P080

Sanding belt Glob 35 x 650 mm, abrasive cloth P80 is a replacement sanding belt designed for belt sanders that accept 35×650 mm belts. The belt features a P80 grit abrasive cloth that provides medium-coarse sanding performance for a range of materials including wood and metal. It is intended for smoothing surfaces, removing old coatings, deburring edges and preparing substrates prior to finishing or painting.

Advantages

The P80 abrasive cloth offers a balance between material removal rate and surface finish, enabling efficient stock removal while leaving a surface suitable for subsequent finer sanding or finishing. The belt’s dimensions (35 x 650 mm) match common compact belt sanders, making replacement straightforward. Constructed for workshop and renovation use, the abrasive cloth resists tearing under normal operating conditions and maintains consistent abrasive action across the belt surface.

Suitable for

• Smoothing raw timber and dimensional wood work
• Removing paint, varnish or other coatings from surfaces
• Deburring metal edges and removing rust spots
• Surface preparation before filling, priming or painting

Key specifications

• Abrasive type: cloth
• Grit size: P80 (medium-coarse)
• Dimensions: 35 mm width × 650 mm length
• Intended use: manual or power belt sanders accepting 35×650 mm belts
• Primary materials: wood and metal surface work

How to use

Fit the sanding belt onto a compatible belt sander following the machine manufacturer’s instructions, ensuring correct orientation and tension. Start sanding with steady, even passes, applying moderate pressure and allowing the abrasive to do the work; avoid excessive force that may cause premature wear or clogging. For paint or varnish removal, work progressively and check the surface frequently. Replace the belt when abrasive performance decreases or the cloth shows significant wear or damage.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, dust mask and hearing protection when operating power sanders. For best results on wood, consider finishing with finer grit belts or sanding paper after initial treatment with P80 to achieve the desired smoothness.