Flap disc Glob 125 mm P60 for angle grinder, zirconia abrasive, 125mm Ø

Flap disc Glob 125 mm P60 is a 125 mm diameter abrasive disc for angle grinders designed with zirconia-based flaps. The P60 grit offers medium-coarse cutting performance for efficient material removal while maintaining control for surface blending and edge shaping. The disc is suitable for use on steel and other metals, and is intended for tasks such as grinding weld seams, deburring edges and preparing surfaces prior to painting or coating. It is made to fit angle grinders that accept 125 mm discs and to deliver consistent abrasive action through layered flap construction.

Advantages

The zirconia abrasive composition provides improved cutting speed and longer life compared with conventional aluminum oxide flaps in metalworking applications. The layered flap design maintains a uniform cutting face as the disc wears, ensuring even material removal and reduced vibration. Medium-coarse P60 grit balances stock removal and surface finish, allowing both shaping and blending without frequent disc changes. The 125 mm diameter gives access to tighter areas than larger discs while still offering substantial contact area for stable operation.

Suitable for

• Grinding and shaping steel and ferrous metals
• Removing weld beads and smoothing weld seams
• Deburring cut edges and removing sharp burrs
• Preparing metal surfaces before painting, powder coating or plating
• Surface blending and feathering after repair work

Key specifications

• Diameter: 125 mm
• Abrasive type: zirconia-based flaps
• Grit size: P60 (medium-coarse)
• Designed for use with angle grinders accepting 125 mm discs
• Construction: layered flap design for consistent wear

How to use

Mount the flap disc on a compatible 125 mm angle grinder following the grinder manufacturer’s instructions and ensure the disc is secured correctly before operation. Use appropriate rotational speed within the disc and grinder limits, apply steady moderate pressure, and move the disc across the workpiece to avoid gouging. For weld seam removal and shaping, approach the weld at a shallow angle and use smooth, overlapping passes. Inspect the disc periodically for uneven wear or damage and replace it if the backing becomes exposed or performance degrades.

Usage recommendations

Wear suitable personal protective equipment including eye protection, gloves, hearing protection and respiratory protection when required. Use the P60 flap disc for medium material removal and surface blending; switch to finer grit discs for final finishing. Store discs in a dry, cool place to preserve abrasive performance and avoid impact or deformation during handling.