Circular Milling Cutter Globus FP110-0063-0035 63×16×1.60/64 teeth A5

Globus circular milling cutter FP110-0063-0035 is a narrow, toothed milling disc with dimensions 63 × 16 × 1.60 mm and 64 teeth in A5 tooth form. It is designed for precision milling, slotting and profiling operations where a slim, accurately ground cutting edge is required. The cutter is compatible with machines and tool holders that accept circular toothed cutters of this geometry and is intended for use in workshop and industrial milling setups.

Advantages

The cutter provides high repeatability in slotting and trimming tasks thanks to its consistent tooth spacing and uniform A5 tooth form. Its narrow kerf and thin body reduce material waste and allow for fine, precise cuts. The 64-tooth configuration supports smooth surface finish and controlled chip removal at appropriate feed rates. The product's construction enables stable performance during continuous or intermittent milling cycles.

Suitable for

• Precision slotting and narrow-profile cutting
• Trimming and finishing of thin panels or strips
• Profiling operations on compatible materials with A5 tooth geometry
• Workshop and industrial milling machines that accept circular milling discs

Key specifications

• Outer diameter: 63 mm
• Cutting width (body): 16 mm
• Thickness (kerf): 1.60 mm
• Number of teeth: 64
• Tooth form: A5

How to use

Mount the circular milling cutter on a compatible arbor or tool holder according to the machine manufacturer's instructions, ensuring secure clamping and correct concentricity. Select spindle speed and feed rate appropriate for the work material and the 64-tooth configuration to achieve the desired surface finish and avoid overheating. Use appropriate coolant or air extraction where required, and perform trial cuts to confirm settings before full operation. Inspect the cutter and mounting regularly for wear or damage and replace when tooth geometry degrades.

Usage recommendations

For best results, match spindle speed and feed per tooth to the workpiece material and maintain stable machine setup. Use protective guards and appropriate personal protective equipment. Store the cutter in a dry, protected location to avoid corrosion and mechanical damage between uses.