Cutting Milling Cutter Globus FP110-0100-0005 HSS 100×22×1.6 mm

Solid HSS cutting milling cutter Globus FP110-0100-0005 with a 100 mm diameter, 22 mm bore and 1.6 mm thickness. Manufactured from high-speed steel (HSS), this cutting milling cutter is designed for metalworking operations that require precise slotting, trimming and profile cutting. The tool is suitable for both manual and machine use where a 100 mm diameter cutter with a 22 mm mounting hole is required and HSS cutting performance is appropriate.

Advantages

The solid HSS construction provides good wear resistance and heat tolerance for medium-speed machining in steel and similar metals. Its 1.6 mm cutting width enables narrow slots and fine trimming with controlled material removal. Standard 22 mm bore allows compatibility with common arbors and collets for secure mounting. The simple geometry supports predictable cutting behavior and straightforward sharpening when needed.

Suitable for

• Slotting and grooving in steel and ferrous metals
• Trimming and finishing sheet or plate edges
• Profile cutting and small-radius contouring
• Use in manual milling setups and machine spindles with 22 mm arbor

Key specifications

• Material: high-speed steel (HSS)
• Diameter: 100 mm
• Bore (mounting hole): 22 mm
• Thickness (cutting width): 1.6 mm
• Type: solid cutting milling cutter for metal

How to use

Mount the cutter on a compatible arbor or collet with a secure fit to prevent runout. Check that the spindle speed and feed rate match HSS tooling recommendations and the workpiece material; moderate spindle speeds are typical for HSS on steel to balance cutting efficiency and tool life. Use appropriate coolant or cutting fluid for operations in steel to reduce heat buildup and extend tool life. Verify alignment and perform a test cut to confirm correct mounting and parameters before full operation.

Usage recommendations

For optimal results, use cutting fluid when machining steel and maintain conservative feed rates to avoid excessive heat. Inspect the cutting edges regularly and regrind as necessary to preserve cut quality. Ensure the mounting arbor is rigid and free of play to minimize vibration and achieve accurate slot dimensions.