Circular Saw Blade Globus KB for Cross-Cutting Hard and Soft Wood 500x30 mm 60 teeth

Globus KB circular saw blade for cross-cutting is engineered for clean, precise cuts in both hard and soft wood. With a 500 mm diameter and 30 mm bore, and 60 carbide-tipped teeth, this blade is designed to deliver consistent performance on table saws and saw benches that accept a matching arbor. The tooth geometry and carbide tips reduce tear-out and maintain edge life for repeated cross-cutting of timber, laminated boards and beams.

Advantages

The 60-tooth configuration balances cutting speed and surface quality, producing smooth end-grain finishes with minimal sanding. Carbide-tipped teeth increase wear resistance and maintain sharpness over extended use, lowering the frequency of resharpening. The large diameter and 30 mm bore provide stability at higher RPMs, improving cut accuracy and reducing vibration during cross-cuts.

Suitable for

• Cross-cutting softwood and hardwood timber
• Cutting laminated boards and furniture components
• Trimming beams and joists to length
• Use on table saws and saw benches with compatible arbor

Key specifications

• Blade diameter: 500 mm
• Bore (arbor) diameter: 30 mm
• Number of teeth: 60
• Tooth tip material: carbide-tipped
• Application: cross-cutting of hard and soft wood, laminated boards, beams

How to use

Install the blade on a table saw or saw bench that matches the 30 mm arbor. Ensure the saw is powered off and isolated before changing the blade. Mount the blade with correct rotation direction and tighten the arbor flange securely. Set the cutting height and fence for accurate cross-cuts, and make test cuts on scrap material to confirm settings. Feed the workpiece steadily and use appropriate pushing tools or featherboards to maintain consistent pressure and safe hand distance from the blade.

Usage recommendations

Use appropriate personal protective equipment, including eye and hearing protection. Match blade speed and feed rate to the timber species and thickness to avoid burning or chipping. Keep the blade clean and free of resin build-up; sharpen or replace carbide tips when cutting quality declines. Verify that the table saw’s RPM and arbor configuration are compatible with a 500 mm blade before operation.