Globus PT150-0550-0001 is a 550 x 30 mm circular saw blade with 84 teeth designed for precision cross-cutting of hard and softwood. The blade fits circular saws and table saws with a 30 mm bore and is intended for workshop and industrial use where clean cross-cuts and minimal tear-out are required. A high tooth count and tooth geometry prioritise smooth finish and accuracy when cutting across the grain.
Advantages
The 84-tooth configuration reduces splintering and produces finer surface quality on cross-cuts than low-tooth blades. A 30 mm centre hole ensures compatibility with many circular and table saw spindles. The blade geometry and tooth density balance cutting speed with surface finish, making it suitable for applications that need both precision and repeatability.
Suitable for
- Finish carpentry and trim work
- Furniture components and panel cross-cutting
- Precision joinery and small production runs
- Workshop table saws and industrial circular saws with 30 mm arbor
When it may not be suitable
This blade is optimised for cross-cutting and producing smooth finishes; it is not intended for aggressive ripping along the grain or for cutting non‑wood materials such as metal or masonry. For faster removal of material or rough ripping tasks, a blade with fewer, larger teeth and different geometry will be more appropriate.
Key specifications
- Diameter: 550 mm
- Arbor/centre hole: 30 mm
- Number of teeth: 84
- Intended material: hard and softwood (cross-cutting)
How to use
Mount the blade on a compatible circular saw or table saw spindle with a 30 mm arbor, following the machine manufacturer’s instructions and ensuring the saw is disconnected from power during fitting. Check blade alignment, tightening, and runout before use. Use appropriate feed speed and push support to avoid burning the wood; slow, steady feeds yield the best surface quality with a high-tooth blade. Wear suitable eye and hearing protection and follow all safety guidelines for the saw being used.
What to consider before purchase
- Confirm your saw’s arbor/bore diameter is 30 mm for compatibility
- Assess whether a high-tooth crosscut blade fits your workflow versus a ripping blade
- Check maximum allowable blade diameter and RPM of your saw
Usage recommendations
For best results with the Globus 550x30 mm 84-tooth blade, perform cross-cuts with steady feed rates and clean, supported workpieces. When cutting veneered panels or thin stock, use an auxiliary zero-clearance insert or backing support to minimise tear-out. Maintain blade sharpness and inspect for wear to preserve cut quality and extend service life.
