Circular Saw Blade Globus BRYTAN 130×16×2.7/1.2 mm 10 teeth

Globus BRYTAN circular saw blade with a 130 mm diameter and 16 mm bore is designed for use in compact circular saws that accept a 16 mm arbor. The blade plate thickness is 2.7 mm and the carbide tip thickness is 1.2 mm. With 10 coarse teeth, this blade is intended for fast, rough cuts and trimming tasks in wood and similar workpieces where a reduced number of larger teeth provides rapid material removal and efficient crosscutting.

Advantages

The Globus BRYTAN 130×16×2.7/1.2 mm blade offers a balance of rigidity and cutting speed due to its 2.7 mm plate and carbide-tipped teeth. The 10-tooth configuration reduces cutting resistance and increases feed rate, while the carbide tips provide wear resistance and retain sharpness longer than high-speed steel. The 16 mm bore ensures secure mounting on compatible saws and helps maintain concentric rotation for smoother operation.

Suitable for

• Fast crosscuts in soft and hardwoods
• Trimming and rough ripping where coarse tooth pattern is acceptable
• Portable circular saws and compact table saws with 16 mm arbor
• Construction and renovation tasks requiring rapid material removal

Key specifications

• Diameter: 130 mm
• Bore (arbor): 16 mm
• Plate thickness: 2.7 mm
• Carbide tip thickness: 1.2 mm
• Number of teeth: 10
• Tooth type: coarse carbide-tipped teeth for aggressive cutting

How to use

Install the blade on a compatible circular saw or table saw with a 16 mm arbor following the tool manufacturer’s instructions and ensuring the saw is disconnected from power. Verify blade rotation direction matches the saw’s indicator, tighten the arbor flange to the recommended torque, and check blade runout before use. For safer and more precise results, secure the workpiece, set the correct cutting depth, and use steady feed pressure. Allow the blade to clear chips between passes and avoid forcing the cut to prevent overheating and premature wear of the carbide tips.

Usage recommendations

Use the Globus BRYTAN 130×16×2.7/1.2 mm blade for applications where fast material removal is the priority. For finer finish cuts, consider switching to a higher-tooth-count blade. Regularly inspect the carbide tips and clean pitch build-up to extend blade life.