Outdoor LED Floodlight GOOBAY 50 W with PIR Motion Sensor, IP44, 230 V, Aluminium Housing

GOOBAY Outdoor LED Floodlight 50 W provides bright neutral white illumination (4000 K) with a total luminous flux of 4250 lm. The unit integrates a passive infrared (PIR) motion sensor with adjustable settings and an M16 cable gland for easy installation. Constructed with a die‑cast aluminium housing and tempered glass, the fixture is designed for outdoor environments with an IP44 protection rating and operates from 230 V AC (50 Hz).

Advantages

The floodlight combines high luminous output with compact dimensions, offering strong energy savings of up to 80% compared with halogen floodlights. The built‑in PIR sensor can be switched on or off so the lamp can function either as automatic security lighting or as a standard LED floodlight. A robust angled mounting bracket allows wall mounting or fixation to a tripod and provides up to 180° rotation for flexible aiming.

Suitable for

• Illuminating driveways and carports
• Garden and terrace lighting
• Facade and access path lighting
• Security and motion‑activated exterior lighting

When it may not be suitable

This floodlight has an IP44 rating, which protects against splashing water but is not fully waterproof; it is not intended for continuous immersion or extremely exposed marine environments. The unit requires a 230 V AC mains connection and is therefore unsuitable where only low‑voltage or battery power is available.

Key specifications

• Light output: 4250 lm
• Colour temperature: 4000 K (neutral white)
• Rated power: 50 W
• Sensor type: PIR motion sensor with ON/OFF function
• Sensor detection: up to 10 m at 180° angle; adjustable sensitivity, range and timeout (sensitivity 5–2000 lx; timeout 5–600 s; range 1–10 m)
• Housing: die‑cast aluminium with tempered glass
• Mounting: angled bracket with up to 180° rotation for wall or tripod mounting
• Protection class: IP44 for outdoor use
• Supply: 230 V AC, 50 Hz

How to use

Mount the floodlight using the supplied angled bracket on a stable wall or attach it to a compatible tripod. Route the mains cable through the M16 cable gland (clamping range/cable diameter 4–10 mm) and connect to a 230 V AC supply following local electrical regulations. Adjust the PIR sensor settings—light sensitivity, detection range and switch‑off delay—to match the required coverage and behavior. The sensor can be switched off if continuous illumination is preferred.

What to consider before purchase

• Ensure availability of a 230 V AC mains connection at the installation point
• Check that IP44 protection is sufficient for the intended outdoor location
• Confirm mounting surface and space for the angled bracket and rotation range
• Verify cable diameter falls within the M16 gland clamping range (4–10 mm)

Usage recommendations

For security purposes position the floodlight to cover entry points and adjust the PIR sensitivity and timeout to avoid frequent false triggers from nearby vegetation or traffic. For general area lighting use the sensor OFF to provide continuous neutral white illumination.