Speaker cable GOODBABY SMYp 2 x 0.5 mm, black, 200 m length

GOODBABY SMYp speaker cable with two 0.5 mm conductors on a 200 m reel is intended for low-voltage audio connections in home and commercial installations. The black twin-core cable is designed to carry speaker-level signals between amplifiers and loudspeakers, allowing long runs and in-wall routing where a compact conductor size is sufficient. Supplied on a reel for easier unwinding and installation, it fits multi-room audio systems, wall-mounted speakers, and temporary event setups.

Advantages

The GOODBABY SMYp cable offers a compact twin-conductor design that is easy to route through conduits and inside walls. Its 0.5 mm conductor cross-section provides a balance between flexibility and signal transmission for short to moderate lengths. The 200 m reel reduces the need for multiple joins, simplifying installations that require continuous runs. The black outer sheath gives a discrete appearance when visible and helps to conceal the cable along skirting boards or behind equipment.

Suitable for

• Connecting bookshelf or in-wall speakers to small amplifiers in home audio setups
• Multi-room audio distribution where compact cable packs are needed
• Commercial audio zones with moderate cable length requirements
• Temporary or permanent event installations requiring long continuous cable runs

When it may not be suitable

This 0.5 mm conductor cable is not intended for high-power professional audio applications or very long runs where larger cross-sections are required to avoid audible power loss. For driving low-impedance, high-power loudspeakers or distances that exceed recommended lengths for small-gauge conductors, a thicker speaker cable should be chosen to maintain sound quality and reduce power dissipation.

Key specifications

• Conductor configuration: twin-core (2 conductors)
• Conductor cross-section: 0.5 mm² per conductor
• Outer colour: black
• Length: 200 m on a reel
• Intended signal type: low-voltage speaker/audio signals

How to use

Unwind the required length from the reel and route the cable through conduits, wall cavities, or along surfaces as needed. Strip a short section of the outer sheath and insulation from each conductor to expose the bare core for termination. Connect the conductors to amplifier and speaker terminals, observing correct polarity to preserve phase. Secure excess cable to avoid strain on terminations and use appropriate clamps or conduits for in-wall installations as required by local building regulations.

What to consider before purchase

• Required run length and whether 0.5 mm² conductor is sufficient for the distance and speaker power
• Installation environment (in-wall, conduit, exposed) and any regional wiring or fire-safety regulations
• Need for continuous runs versus multiple shorter lengths and potential connectors
• Compatibility with amplifier and speaker terminal types (spring clip, binding post, screw)

Usage recommendations

For typical home and small commercial installations, use this GOODBABY SMYp 2 x 0.5 mm cable for runs where speaker power and distance are moderate. Keep runs as short as practical for this gauge, maintain correct polarity, and avoid sharp bends. For longer distances or higher-powered speakers, evaluate using a larger cross-section cable to reduce power loss and preserve audio performance.