Double-sided mounting foam tape Grand 12 mm × 3 m (model 130-1212)

Double-sided mounting foam tape Grand 12 mm × 3 m is a foam-backed adhesive tape intended for indoor mounting, fixing and sealing tasks. The tape combines a compressible foam core with adhesive on both faces to provide a cushioned bond between contact surfaces, accommodate minor irregularities and reduce transmission of vibration. With a 12 mm width and 3 m roll length, this product is sized for small to medium repairs, glazing trims and light-duty bonding where a thin, flexible spacer and seal is required.

Advantages

The foam carrier ensures good conformity to uneven surfaces and fills small gaps while the pressure-sensitive adhesives deliver instant tack and reliable holding power on clean, dry substrates. The double-sided format speeds installation by eliminating the need for additional fasteners, and the thin profile keeps joints discreet. The tape’s compressibility provides a degree of vibration damping and prevents rigid point contact between joined parts.

Suitable for

• Attaching lightweight trims, profiles and mouldings
• Securing glass or acrylic glazing strips
• Mounting small signs, nameplates and decorative elements
• Household repairs: fixing loose panels, cable clips and corner seals
• Gap filling and vibration reduction in carpentry and joinery

Key specifications

• Width: 12 mm
• Length: 3 m
• Construction: foam carrier with adhesive on both sides
• Profile: thin, compressible foam
• Application: indoor mounting, sealing and vibration damping

How to use

Ensure both surfaces are clean, dry and free from dust, grease or release agents. Cut the required length from the roll with scissors, peel off the protective liner from one side and press the exposed adhesive firmly onto the first substrate. After setting in place, remove the remaining liner and align the second part; press both surfaces together evenly to achieve full contact. Allow pressure to set the adhesive bond; immediate handling strength is achieved, with full performance reached after standard dwell time depending on substrate and conditions.

Usage recommendations

Use at room temperature on rigid, non-porous or painted surfaces for best results. Avoid application to wet, heavily textured or oily substrates. For heavy loads or outdoor exposure select mechanical fasteners or a product specified for exterior use. Store the roll in a cool, dry place away from direct sunlight to preserve adhesive performance.