Double-sided mounting foam tape Grand 24 mm x 3 m (model 130-1216)

Double-sided mounting foam tape Grand 24 mm x 3 m is a closed-cell foam adhesive strip designed for indoor mounting, bonding and fixing of lightweight materials. With a 24 mm width and 3 m length, this foam tape conforms to uneven surfaces, fills small gaps and provides cushioning to reduce stress from vibration and thermal movement. It is suitable for attaching trims, nameplates, hooks and small panels to common interior substrates such as painted walls, glass, metal and plastics.

Advantages

The foam construction offers elasticity and surface conformity, enabling reliable contact across uneven areas without excessive pressure. Both adhesive faces provide immediate tack and good initial hold, while the foam layer compensates for minor irregularities and helps damp vibrations. The tape is easy to cut to required lengths and applies cleanly when surfaces are prepared according to instructions.

Suitable for

• Attaching decorative trims and mouldings indoors
• Mounting nameplates and signage on smooth interior surfaces
• Fixing lightweight panels and cable clips
• Installing small hooks and fixtures where vibration damping is needed

Key specifications

• Width: 24 mm
• Length: 3 m
• Material: closed-cell foam with pressure-sensitive adhesive on both sides
• Color: typically white or off-white foam with protective release liner
• Backing: flexible foam for gap-filling and surface conformity

How to use

Ensure both surfaces are clean, dry and free of dust, grease or loose paint. Cut the required length of tape with scissors, peel off one release liner and press the exposed adhesive firmly onto the mounting piece. Remove the second liner and position the part against the substrate, applying uniform pressure across the bonded area for several seconds to promote adhesion. Allow time for the bond to develop before subjecting the joint to load; full adhesion depends on surface type and environmental conditions.

Usage recommendations

For best results, apply the tape at room temperature on non-porous, stable surfaces. Avoid use on textured or highly porous substrates without testing. For heavier loads or outdoor exposure, consider mechanical fastening or a product rated for outdoor use. Store the roll in a cool, dry place away from direct sunlight.