Sandpaper Sheets on Hook-and-Loop for Delta Sander GRAPHITE 140×140×80 mm K120, 5 pcs, with Holes

Replacement sandpaper sheets designed for delta or triangular sanders by GRAPHITE, size 140×140×80 mm with abrasive grit K120. Each sheet features a hook-and-loop (velcro) backing for quick attachment and removal, plus a pattern of dust-extraction holes that align with common delta sander pads. The pack contains five sheets intended for finish and intermediate sanding of wood, lacquer, filler and similar surfaces, with particular suitability for edges and corners where triangular pads reach.

Advantages

The hook-and-loop fastening provides secure attachment and fast changeover without tools. The K120 abrasive grit balances material removal and surface refinement, enabling controlled smoothing of wood and prepared surfaces. Integrated dust-extraction holes improve dust removal during sanding when used with a compatible vacuum or dust-collection sander pad, helping maintain a clearer work area and prolonging abrasive life. The triangular shape and dimensions are tailored to access tight angles and corners more effectively than round or rectangular sheets.

Suitable for

• Finish and intermediate sanding of wooden surfaces
• Preparing surfaces under lacquer, paint or varnish
• Sanding filler and putty prior to final finishing
• Detail work on edges, corners and tight spaces
• Use with hook-and-loop delta/triangular sanding pads equipped for dust extraction

Key specifications

• Shape and size: triangular / delta, 140×140×80 mm suitable for standard delta sander pads
• Abrasive grit: K120 for intermediate/finish sanding
• Attachment system: hook-and-loop backing for quick change
• Dust handling: perforated pattern compatible with dust-extraction pads
• Quantity: 5 sheets per pack

How to use

Ensure the sander is powered off and disconnected from mains or battery before fitting the sheet. Align the sheet’s holes with the dust-extraction holes in the sander pad, press firmly to secure the hook-and-loop backing, and confirm the sheet is flat and properly seated on the pad. Begin sanding at low pressure and moderate speed to assess material removal, increasing pressure or changing technique as needed while keeping the sander moving to avoid gouging. Replace the sheet when the abrasive surface shows reduced cutting performance or clogging.

Usage recommendations

For best results, use the K120 sheets for intermediate smoothing and as a preparation step before finer grits; follow with a finer abrasive for final finishing. Combine with a compatible dust-extraction system to improve visibility, reduce airborne dust, and extend sheet life. Store sheets flat in a dry environment to prevent deformation and contamination.