Sandpaper sheets GRAPHITE 93 x 230 mm K80, abrasive grit K80, pack of 5 with holes

GRAPHITE sandpaper sheets 93 x 230 mm with abrasive grit K80 are designed for medium-to-coarse sanding tasks. Supplied as a pack of 5 sheets with dust-extraction holes, these sheets are suitable for use with compatible orbital and detail sanders as well as for manual sanding. The K80 grit provides efficient material removal for shaping, leveling rough surfaces and preparing substrates such as wood, paint, primer and soft metals prior to further finishing.

Advantages

The sheets combine a durable abrasive layer and a flexible backing that conforms to curved and flat surfaces while maintaining consistent sanding performance. Pre-punched holes enable connection to dust-extraction systems of compatible sanders, improving visibility and reducing airborne dust. The standardized size fits many common orbital and detail sander models, allowing quick replacement and continuous work flow.

Suitable for

• Sanding and shaping raw or planed wood
• Removing old paint and leveling primer coats
• Surface preparation before applying fillers, primers or new coatings
• Light material removal on soft metals and composites
• Use with orbital/detail sanders that accept 93 x 230 mm sheets with holes or for hand sanding

When it may not be suitable

These K80 sheets are relatively coarse and therefore not appropriate for fine finishing or polishing tasks where higher grit (e.g., 180–400+) is required. They are also not intended for heavy-duty grinding of hardened steels or applications that require specialized ceramic or diamond abrasives.

Key specifications

• Sheet size: 93 x 230 mm
• Abrasion grit: K80 (coarse)
• Pack quantity: 5 sheets
• Feature: dust-extraction holes for compatible sanders
• Suitable backing: flexible paper for hand and machine use

How to use

Attach a sheet to a compatible orbital or detail sander following the tool manufacturer's instructions, aligning the dust-extraction holes if the sander has a vacuum port. For hand sanding, wrap the sheet securely around a sanding block or use it by hand with even pressure. Start with light to moderate pressure and move the sander or hand in consistent, overlapping passes along the workpiece. Inspect the surface periodically and change to a finer grit when the desired smoothness or shape is achieved.

What to consider before purchase

• Confirm that your sander accepts 93 x 230 mm sheets and aligns with the hole pattern
• Choose grit K80 for material removal and initial shaping rather than final finishing
• Ensure that a pack of 5 sheets meets the quantity needs of your project
• Consider dust extraction compatibility to improve cleanliness and visibility during sanding

Usage recommendations

For efficient results, start with K80 to remove material and correct surface defects, then progress to finer grits for smoothing and final preparation. Use dust extraction when available to extend abrasive life and keep the work area clear.